| Directory |
Trade Leads |
Rated |
Visits |
Date |
Images |
Auto Maintenance
 |
 Porsche Cable
Our product communicates with your car just like the factory tool does, and can access all of the systems in the car. OBD2 was created for emissions related problems and only covers a limited subset of your car's engine. |
0 (#0) |
5 |
2008.09.03 |
 |
Auto Maintenance
|
Renault Original Tool
It's very simple to diagnose a vehicle using Renault Can Clip Diagnostic Interface: just select the vehicle make, enter the V.I.N. and press ENTE. |
0 (#0) |
12 |
2008.09.03 |
|
Auto Maintenance
|
CONSULT III
Nissan Motor Co., Ltd., has developed the "CONSULT-III,"(*1) a handheld diagnostic tester for various in-vehicle electronic systems, with the aim of realizing swift and accurate diagnosis and repairs at Nissan dealerships worldwide. The diagnostic tester will be introduced at Nissan dealerships in Japan and other global markets. The roll-out of the new system will coincide with the introduction of the Skyline sedan in Japan this month, and global markets where the Infiniti G35 will be sold, followed progressively by all other remaining markets as new generation products are introduced. |
0 (#0) |
7 |
2008.09.03 |
|
Auto Maintenance
|
GNA 600
The GNA600 is a VCI device that allows you to update control modules on all Honda and Acura vehicles that have programmable chips, including vehicles using the CAN (control area network) communications protocol on the DLC (data link connector) except for 1996?999 Acura SLXs and 1996/2002 Honda Passports. For these vehicles, refer to the Smart Cable for details. |
0 (#0) |
6 |
2008.09.03 |
|
Auto Maintenance
|
BMW Key Scanner AK80
1.Reading all BMW keys information (from year 1994 to 2006), included 740L1 of BMW vehicles from year 1994 to 2008, quickly read the key information: (1) Keys No. (2)Stored milage (3) VIN
2.Synchronized testing the keys. if the scanner shows?KEYEWS SYN OK?, it means the key programming is succeed
3.Testing the coil signals of all vehicles which with anti-theft chip to help you find out the fault of the anti-theft system quickly.
|
0 (#0) |
7 |
2008.09.03 |
|
Auto Maintenance
|
Lexia-3 Citroen/Peugeot diagnostic tool
It is the Dealer diagnostic scanner for comprehensive Citroen and Peugeot cars diagnostic. You can do all as a authorized dealer does.This diagnostics software allows you to perform complete diagnostics of all from 1995 untill present models. Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
Supported functions
Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
The following diagnostic functions are supported:
Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
Clear fault codes
This function clears all stored fault codes and other diagnostic information.
Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
Programming functions/Adaptation
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.
Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to work PC.
|
0 (#0) |
6 |
2008.09.03 |
|
Auto Maintenance
|
FERRARI/MASERATI SD3 Diagnostic System
Sd3 is the lastest inspect equipment for Ferrari/Maserati. It has the manufacturer?s authorization,it has the functions of reading code,clearing code,data flow ect.It is the only tool for repairing Ferrari/Maserati.
The SD3 Diagnostics System is an electronic device for the diagnostics of electronic control units (ECU) installed in modern vehicles
|
0 (#0) |
7 |
2008.09.03 |
|
Auto Maintenance
|
Mitsubishi MUT 3
In accordance with releasing new products that introduce CAN communications systems, MMC has developed the MUT-III as a next generation diagnosis tester for servicing these new and future vehicles.
Features:
1. Color Display.
2. Fast vehicle scan.
3. Laptop is battery powered or powered via vehicle cigar lighter/power outlet.
4. Data Display utilizes either graphical or digital display.
5. Can perform drive recorder on most Mitsubishi vehicles.
Package Including:
1. MUT III Scan Tool Kit.
2. Vehicle Communication Interface (VCI).
3. Multi-Meter Adapter Harness.
4. USB 2.0 cable.
5. Harness A (blue).
6. Harness B (red).
7. Harness C (yellow).
8. Compact Flash 128MB Memory.
9. Compact Flash Adapter.
10. MUT-III case.
|
0 (#0) |
10 |
2008.09.03 |
|
Auto Maintenance
|
Psa Peugeot Planet 2000
Software:
1. Standard operating system: Windows XP Pro.
2. Automatic centralized diagnostic software: Peugeot Planet Diag.
3. Parameterization and electronic configuration software: Peugeot Planet 2000.
4. Interactive wiring diagram software on the INFOTEC internet site.
5. Diagnostic information in the diagnostic section of the INFOTEC Internet site. Including the following communications software:
VNC: allows the Peugeot Assistance platforms to take over the PPS tools by remote control.
Internet Explorer: to access the constructor.s Internet site and particularly INFOTEC (wiring diagrams, etc.).
Norton Anti-Virus: anti-virus software.
Contact me :shirleyliu
E-mail :liuchun508@autoobd.net
MSN :liuchun508@163.com
Skype :shirleyliuchun
|
0 (#0) |
17 |
2008.08.22 |
 |
Auto Maintenance
|
MUT-III
Package Including:
1. MUT III Scan Tool Kit.
2. Vehicle Communication Interface (VCI).
3. Multi-Meter Adapter Harness.
4. USB 2.0 cable.
5. Harness A (blue).
6. Harness B (red).
7. Harness C (yellow).
8. Compact Flash 128MB Memory.
9. Compact Flash Adapter.
10. MUT-III case.
Contact me :shirleyliu
E-mail :liuchun508@autoobd.net
MSN :liuchun508@163.com
Skype :shirleyliuchun
|
0 (#0) |
10 |
2008.08.22 |
|
Auto Maintenance
|
HIM (Honda & Acura Diagnostic System)
HIM Main Function:
1. Read out trouble code, Erase trouble code
2. Data Stream
3. Drawing data stream curve
4. System settings
5. Control Unit programming
6. Selftest interior status of IC
7. Record and Re-display
8. Bidirectional Control function ? Read out responsed data under Drive actuation components
Contact me :shirleyliu
E-mial :liuchun508@autoobd.net
Skype :shirleyliuchun
MSN :liuchun508@163.com
|
0 (#0) |
9 |
2008.08.22 |
|
Auto Maintenance
|
VOLVO Original Tool -----VIDA
Standard Accessories:
1. Main Unit(Windows XP or Windows 2000)
2. VIDA or VADIS Software
3. RS232 Line
4. 16-PIN Cable
Contact me :shirleyliu
E-mail :liuchun508@autoobd.net
msn :liuchun508@163.com
Skype :shirleyliuchun
|
0 (#0) |
24 |
2008.08.22 |
|
Auto Maintenance
|
Tech II for GM
Vetronix Tech 2 Specifications:
1. Dimensions: 12″?6″?2″
2. Microprocessor: 32 bit, 16 MHz
3. Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion
4. Communications: Integral RS232 communication port
5. Screen: 3.8″?2.8″ backlit monochrome with full graphics capability: 320?240 pixels. Displays up to 9 vehicle parameters at once.
Contact me :shirleyliu
E-mail :liuchun508@autoobd.net
MSN :liuchun508@163.com
Skype :shirleyliuchun
|
0 (#0) |
10 |
2008.08.22 |
|
Auto Maintenance
|
Toyota intelligent tester II
Functions and Features:
1. Detect Vehicle Connected Automatically
2. Display Vehicle Current Data Parameters (Data List)
3. Display Diagnosis Trouble Codes (DTC)
4. Activate Relays, Solenoids, etc. (Active Test)
5. Display Voltage Signals from Voltage Meter Probe
6. Store All Data Parameters Before and/or After Problem Occurs (Snapshot)
7. Reprogram ECUs
Contact me :shirleyliu
E-mail :liuchun508@autoobd.net
|
0 (#0) |
27 |
2008.08.21 |
|
Auto Maintenance
|
Bmw gt-1 diagnosis tool
PC LAN cable GT1(EDIC) OBDII cable Car
Contact me :shirleyliu
E- MAIL :liuchun508@autoobd.net |
0 (#0) |
22 |
2008.08.21 |
|
Auto Maintenance
|
AD-1 universal auto scanner
Features:
1. Universal: The system works for European, Domestic, Asian, Korean, Japanese, Malaysian and Chinese vehicles.
2. Wireless: A range of 50 meters/yards means no more tangled cables.
3. Remote capable: Utilizing the latest PC Anywhere ? technologies, remote diagnostics is possible for the first time with the AD-1. One expert can support multiple locations virtually anywhere in the world.
4. Durable: Can be used in hot or cold weather, from -20?C to 50?C (-4 to 120?F).
5. Platform: Operates on either XP or Vista operating systems.
6. Interface: USB "plug-and-play" technology and high baud transceiver for faster data transfer.
7. Report: Results can be saved and printed for later reference.
8. Upgrading: Software can be upgraded anywhere via internet. New functions and features are added constantly to cover more vehicle models.
9. Hardware: Anti-shock rubber guards for stronger, more durable usage.
10. Flexible: Able to communicate with engine, transmission, airbag, anti-lock brake, anti-theft and body control modules in most vehicles.
11. Control functions: Binary communication allows component activation for testing.
12. Multilingual language support.
Contact me :shirleyliu
E-mail :liuchun508@autoobd.net
|
0 (#0) |
20 |
2008.08.21 |
|
Auto Maintenance
|
AD-100 auto scanner
1. SAE-J1850 PWM.
2. SAE-J1850 VP.
3. ISO-14230.
4. ISO-9141.
5. ISO-15765-4 (CAN BUS)
Contact me :shirleyliu
E-mail :liuchun508@autoobd.net |
0 (#0) |
35 |
2008.08.21 |
|
Auto Maintenance
|
PIWIS
PIWIS is the latest special diagnostic equipment of the Porsche Company which is adopted in the Porsche worshop. It can read codes, clear codes, read ECU info, read data stream for all type of Porsche vehicles. It also could test, program & guard against theft according to its data flow. It could lead to malfunction self-inspect and full car circuit diagram for the car which was made after 2005. It also has the function of measuring leads as multimeter. It's the essential equipment for Porsche vehicle technician. |
0 (#0) |
22 |
2008.08.14 |
|
Auto Maintenance
|
PPS
Peugeot Planet 2000 is diagnostics software and hardware used in autorized Peugeot workshops.
The software runs on Windows XP. Peugeot Planet 2000 interface is connected to computer via USB cable.
Hardware
An IBM Thinkpad X31 laptop computer with Windows XP Pro operating system, Norton anti-virus software (with 3-year Internet update), an integrated Wi-Fi card for wireless communication via Internet and a Bluetooth card. The equipment is covered by a 3-year on-site warranty. ..
Software
Standard operating system: Windows XP Pro.
Automatic centralized diagnostic software: Peugeot Planet Diag.
Parameterization and electronic configuration software: Peugeot Planet 2000.
Interactive wiring diagram software on the INFOTEC internet site.
Diagnostic information in the diagnostic section of the INFOTEC Internet site. Including the following communications software?
|
0 (#0) |
20 |
2008.08.14 |
|
Auto Maintenance
|
VCM
The Ford Integrated Diagnostic System (IDS) will be the only equipment that provides complete diagnostic coverage of current and future Ford, Lincoln and Mercury vehicles in North America.
IDS VCM Accessories
Vehicle Communication Module (VCM).
16-Pin DLC Short Cable.
16-Pin DLC Long Cable.
IDS 4m PC Ethernet-USB Host Cable.
DVD(Ford/Mazda).
DVD(Land Rover/Jugar).
|
0 (#0) |
21 |
2008.08.14 |
|
Auto Maintenance
|
Tech 2
The Tech 2 Flash is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2007!
Features
Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Raised tactile keys, clearly labeled, mean no mistaken keypunches Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
|
0 (#0) |
17 |
2008.08.14 |
|
Auto Maintenance
|
MUT-III
In accordance with releasing new products that introduce CAN communications systems, MMC has developed the MUT-III as a next generation diagnosis tester for servicing these new and future vehicles.
Features:
Color Display.
Fast vehicle scan.
Laptop is battery powered or powered via vehicle cigar lighter/power outlet.
Data Display utilizes either graphical or digital display.
Can perform drive recorder on most Mitsubishi vehicles.
|
0 (#0) |
16 |
2008.08.14 |
|
Auto Maintenance
|
HIM
HIM(Honda & Acura Diagnostic System)is the latest diagnostic equipment for Honda vehicles. Diagnostic functions available for vehicles of HONDA/ACURA from year 1992 to2007.
Main Function
Read out trouble code, Erase trouble code.
Data Stream.
Drawing data stream curve.
System settings.
Control Unit programming.
Self-test interior status of IC.
Record and Re-display.
Bidirectional Control function-Read out responded data under Drive actuation components.
|
0 (#0) |
18 |
2008.08.14 |
|
Auto Maintenance
|
VAS 5052A
VAS 5052 was designed especially for mobile use or to be used as a second or third tester. The tool works with cars belonging to VW Group (SEAT-AUDI-VW-SKODA).
Design And Features:
PC-based unit with integrated diagnosis assembly group.
Modes of operation: Self-diagnosis, OBD and Guided functions.
Operation via external worktop mains unit (110V/230V alternating current), vehicle onboard supply network via diagnosis lead or rechargeable battery installed.
TFT color liquid crystal display (touch screen) for control of all functions at the touch of a finger.
Interrogating fault memory of all control units, update programming of all control units or resetting service interval display.
|
0 (#0) |
14 |
2008.08.14 |
|
Auto Maintenance
|
BMW OPS
OPS is mainly used for diagnosis and programming BMW vehicles after E65 series. OPS unit with DIS software is used for diagnosis, which is carried out via OBD-II socket.
Config
OPS Multiplexer.
OBD-II diagnostic cable.
Most diagnostic cable.
LAN Cable.
SSS PC(Optional).
IBM T23/T30 (Optional).
DIS 80G HD (Optional).
Wireless Card (Optional).
Toolbox(Optional).
|
0 (#0) |
15 |
2008.08.14 |
|
Prev 25 1 