| Directory |
Trade Leads |
Rated |
Visits |
Date |
Images |
Coatings
 |
 Ultra Fine Powder Coatings
FLUOROFINE 90
POLYFINE 3000
|
0 (#0) |
51 |
2008.06.10 |
 |
Coatings
|
RTV Insulator Anti Flashover Coating
RTV The insulator antifouling Flashover the coating technical specification data sheet
Item
DL/T 627 Standard
Technical Property
（Test Value ）
Test Method
Outward appearance
Does not have the obvious mechanical impurity, does not have the cotton wool shape precipitation, after the solidification smooth smoothly does not have the air bubble
White (red, ash, is transparent) the color mobile liquid, the coating smoothly does not have the air bubble
GB 1721-79
Solid content %
≮22
55
GB 1725-89
Viscosity s
15~60
30
GB 1723-93
Surface resistivity
Ω?m
≮1?1012
1.8?1016
GB 1410-78
Volume resistivity Ω?m
≮1?1014
1.5?1014
Relative permittivity dielectric lose tangent value
≯3.0
2.35
GB 1409-78
≯0.3%
3.0?10-3
Breakdown field value MV/m
≮15
25.6
GB 1408-78
Arc resistance s
≮180
190
GB 1411-78
Resistance to track
and erosion TMA
≥2.5
1A 2.5
GB 6553-86
Adhesion ability （drawing the cycle method ）
No less 2 level
1~2 level
GB 1720-89
Abrasion resistance g
≯0.05
qualified;
GB 1768-89
Rate of water absorption
%
≯0.25
0.16
GB 1738-89
Hydrophobicity
Hydrophobic angle >90?
111.6?
DL/T627-1997
Corrosion proof
Under the acid, the alkali, the salt and the transformer oil function do not have the corrugation, falls off, bubbles, changes color and so on
The experiment does not have the corrugation to fall off bubbles changes color the phenomenon
GB 1739-89
GB 1763-89
The labor frequency arc-over voltage (dryly flashover , wet flashover ) KV
Has the coating insulator not to have the coating insulator not to have relatively to reduce
Have coat 90.3 ,
no coat 89.5
GB 775-87
Have coat 52.0 ,
no coat 49.6
Flashover resistance
U1（have paint coat）/U2
（no paint coat ）>1.5
2.34（average）
GB 4585.1-84
The environment aging performance resistance
The coating should not be cracked under the natural condition, the pulverization, the skin and falls off
After the sample moves for 10 years the coating to be complete, has the good hydrophobic character
GB11206-89
Artificial accelerate ageing
Coating after 1000h artificial accelerated ageing test, is intermediate at least
1000h the salt-fog test does not have has flowed the severance according to GB/T1766 evaluates is 1 level
GB1865-80
Heat resistant denaturation experiment (adhesive force)
Bears 5 times of temperature cycles , the experiment but does not damage
Translation failed! please try again.
DL/T627-1997
Vulcanizing time
Surface dry up ≯30 min
Surface dry up 25 min
GB 6753.2-86
Full dry up ≯7days
Full dry up 72h
|
0 (#0) |
110 |
2008.05.28 |
 |
Coatings
|
PRTV coating
PRTV outside power equipment insulates with takes shape permanence anti flashover compound coating Technology parameter data sheet
Items
Q/HGH 019-2004 Standard
Technical Property （Test）
Test method
Outward appearance
Does not have the obvious mechanical impurity and the cotton wool shape, The coating should level, be smooth also does not have the air bubble
Toughness liquid, Does not have the impurity and the cotton wool shape, The coating is smooth also does not have the air bubble
GB 1721-1979
Viscosity s
100~200
160
GB 1723-1993
Dielectric Strength kV/mm
≮25
32.3
GB 1408-1978
Surface resistivity Ω?m
Volume resistivity Ω?m
≮1?1012
4.25?1013
GB 1410-1978
≮1?1014
2.92?1015
Relative permittivity dielectric lose tangent value
≯3.0
2.7
GB 1409-1978
≯0.3%
2.5?10-3
Arc resistance s
≮180
217
GB 1411-1978
Electricity wear and tear leaks
AC
Alternating current
≮TMA 4.5
1A 4.5
GB 6553-1986
DC
Direct current
≮TMA 3.5
1A3.5
Adhesion ability
Cementation shearing strength MPa
≮3.0
4.7
GB 13936-1992
Cycling method level
No less 2 level
1
GB1720-1989
Abrasion resistance g
≯0.05
0.035
GB 1768-1989
Ratio of Water absorption %
≯0.25
0.15
GB 1738-1989
Hydrophobicity
Hydrophobic
and level
Qav≥100?Qmin≥90?HC1~2
106?~109? HC1
DL/T810-2002
Lose property 96h
Qav≥90?Qmin≥85?HC3~4
Non showing loss
recovery characteristic
t≤24h
Water repellency characteristic 96h
Qav≥110?Q min≥100?HC2~3
14 h Hydrophobicity reach HC1 110?~115?
Erosion Resistance Test
Acid , alkali and salt , 80℃24 h
Does not have the corrugation, falls off, bubbles, changes color and so on, The adhesion is not lower than 2 levels
Does not have the corrugation, falls off, bubbles, changes color the phenomenon, The adhesion is 1 level
GB 1763-1989
transformer oil 105℃24 h
Does not have the corrugation, falls off, bubbles and so on, The adhesion is not lower than 2 levels
Does not have the corrugation, falls off, bubbles the phenomenon, The adhesion is 1 level
GB 1739-1989
Labor frequency arc-over voltage
Dry arc-over voltage kV
Has the coating insulator not to have the coating insulator not to have relatively to reduce
Paint-coat 79.2 , no 75.9
GB 775-1987
Wet arc-over voltage kV
Paint-coat 61.9, no 55.9
Flashover resistance test
U1(have paint-coat )/U2(no paint-coat )≥2.0
U1 /U2 =2.23
GB 4585.1-1984
Heat resistant denaturation experiment -40℃~+80℃，2.5h?5 times
The coating should not damage, The adhesion inspection is not lower than 2 levels
After the experiment the coating does not have bubbles, the dehiscence, falls off, Adhesion 1 level
DL/T627-1997
Salt Spray test 1700 h
The test specimen does not surpass 3 time has flowed the severance
After 1800h，Does not have has flowed the severance
GBT5892-2003
GB/SV023-2003
Does not have leaks the mark, The electricity wear and tears have not reached the porcelain glaze
Does not have leaks the mark, The wear and tears have not reached the glazed surface
Hydrophobic migration characteristic HC2~3 level
HC1~2 level
A row line of experiment passes ≥3.0MPa
3.5 MPa
Flame Resistance
FV-O level
FV-O level
GB/T13488-92
The longitudinal strength and pulls apart the elongation ratio
Strength MPa
≮4.0
5.5
GB/T528-1988
elongation %
No less 350
390
peel strength kN/m
≮12.0
17.5
GB/T529-1988
Hardness (Shao )
35~55
46
GB/T531-1999
Vulcanizing time
Surface Dry up min
20~50
35
GB6753.2-1986
Full dry up h
≯72
65
storage stability 50℃
≥45days
After 60 days ，A row line of experiment passes
GB6753.3-1986
Self Clearance property [Only requests antifouling]
After the dirty fluid cementation is dry, Strips the intensity ≯3kPa(1 level )
Peel off strength 2.3kPa(1 level )
QB/SV021-2003
Anti ?icing property [Only requests to guard against the ice]
Anti- regelation (measure)
Paint-coat ice cover measure /no paint-coat ≯30%
18.3%
QB/SV022-2003
hydration property
DC value ≮90%
91.2%
|
0 (#0) |
80 |
2008.05.28 |
|
Coatings
|
Industrial coating
Industrial coating |
0 (#0) |
166 |
2007.10.19 |
|
Coatings
|
Exterior wall coating
Exterior wall coating |
0 (#0) |
184 |
2007.10.19 |
|
Coatings
|
Interior wall coating
Interior wall coating |
0 (#0) |
182 |
2007.10.19 |
|
Coatings
|
RTV Insulator Anti Flashover coating
The silicon valley brand sign RTV insulator anti flashover the coating to pass, the provincial level appraisal, The nation anti Flashover the expert group to appraise,ISO9001 International quality system authentication and sign DL/T 627 complete patterns experiments; its performance index has achieved the international advanced level |
0 (#0) |
225 |
2007.09.21 |
|
Coatings
|
PRTV outside power equipment insulates with takes shape permanence anti flashover compound coating
it is a kind of electrical power system uses the new electrical function material, it’s specially for the electrical network and each round, loses, uses electricity the customer to be lasting eliminates the equipment flashover thoroughly the hidden danger then to design, It’s developed jointly by the North China electric power academy of science with our company successfully. |
0 (#0) |
222 |
2007.09.21 |
|
Coatings
|
Metal anticorrosion fluorine silicon coating
- |
0 (#0) |
242 |
2007.09.17 |
|
Coatings
|
Organ silicon flame-resistant heat conduction high voltage insulation coating
- |
0 (#0) |
184 |
2007.09.17 |
|
Coatings
|
RTV Insulator Anti Flashover coating
- |
0 (#0) |
185 |
2007.09.17 |
|
Coatings
|
PRTV outside power equipment insulates with takes shape permanence anti flashover compound coating
- |
0 (#0) |
195 |
2007.09.17 |
|
Coatings
|
Organ silicon flame-resistant heat conduction high voltage insulation coating/Metal anticorrosion fl
see above |
0 (#0) |
348 |
2007.06.08 |
|
Coatings
|
RTV Insulator Anti Flashover coating/PRTV outside power equipment insulates with takes shape permane
RTV
PRTV |
0 (#0) |
325 |
2007.06.08 |
|
Coatings
|
DSA-1 Surface Active Agent for Drilling Fluid/SFB-1 Biology Thickening Agent for Drilling Agent
SFB-1
DSA-1 |
0 (#0) |
380 |
2007.06.08 |
|
Coatings
|
SF Fluorine Silicon Filtrate Reducer for Drilling Fluids/Silicon Stability Agent for Drilling Fluids
SF |
0 (#0) |
310 |
2007.06.08 |
|
Coatings
|
SF260 High-temperature Drilling Fluids Thinner/SF200P Fluorine silicon High-temperature Drilling Flu
SF200
SF260 |
0 (#0) |
319 |
2007.06.08 |
|
Coatings
|
SF150 Fluorine Silicon Drilling Fluids Thinner (powder)
SF150P |
0 (#0) |
318 |
2007.06.08 |
|
Coatings
|
sell AR607Pure Polyester Dulling Resin
AR607Pure Polyester Dulling Resin
AR607 is propylene ester resin which contains epoxy. It is one kind of outdoors dulling-resin powder coating. It has good dulling effect and can obtain gloss between 1 - 60% randomly, and it is suitable for dulling gloss between 1 - 30% outdoors pure polyester prowder coating.
Typical characteristics:.
-Fine levelling performance.
-Splendid weathering resistance, saltfog resistance, fire resisting quality and yellow stain resistance.
-Strong anti-shake trait
|
0 (#0) |
255 |
2007.06.07 |
|
Coatings
|
Sell SF-688 General Modifier For Epoxy Power Coatings
SF-688 General Modifier For Epoxy Power Coatings
performance specification:
SF-688 is a kind of acrylic acid copolymer which is composed by a special process. We adopt advanced technique at home and abroad, do specialized research and development about a general-used powder coati
ng flowing control agent, which can be acted on epoxide resin powder coatings, mixed type polyester resin powder coating material, and pure polyester powder coatings.
Typical Properties:
1). Improving levelling and uniform surface behaviour
2).Incresing the soil layer surface¡¯s ability to bear aging
3). Reducing the orange peel and pinhole phenomenon
4). Incresing lubrification for the soil layer surface and the working areas¡¯ surface
5). Strengthen adhesiveness, increasing the soil layer surface hardness
Usage:
Because of different batch formulas and technics in manufacturing different powders, the dosage of this product may be added between 0.6-1.5%; Mix SF-688 powder coating together with other raw materials equably to produce the ordered powders.
|
0 (#0) |
252 |
2007.06.07 |
|
Coatings
|
Sell N,N,N',N'-Tetrakis(2-hydroxyethyl)adipamide
Chemical Name & Synonyms:N,N,N',N'-Tetrakis(2-hydroxyethyl)adipamide
Molecular Weight:320.38
Formula:C14H28N2O6/(CH2CH2OH)2NOC(CH2)4CON(CH2CH2OH)2
CAS: 6334-25-4
1. The product is the compound containing the hydroxyalkyl acidamides based group, and it is also powder coating that can bear marquis, a kind of wonderful matt-finishing hardener. Compared with the matt-finishing hardener that widely using TGIC in the worldwide, this product possess low toxicity, do not activate skin, have high speed to harden, and some other excellent feature; The powder coatings that adopts this product has outstanding performances in outdoors using, and this product is ture green environmental.
2. apperance White fine powder;no order;dissolve in water
hydroxyl value 78-82 g/ equivalent;
Melting point 125-130¡æ
Volatile matter % ¡Ü1.5%
3. This product can harden hydroxide radical polyester ( generally, the acid value is between 20-50mgKOH/g; when the acid value is at 35KOH/g, it is in best condition.) When the temperature is 200¡æ, the harden time is 5 minutes; if the temperature is 150 ¡æ, time needed is 25 mintues; The best condition we commend is 180¡æ, and baking time is 15 minutes. This product is very sensitivity to benzoin, the surface can change yellow easily. To avoid this phenomenon, we should choose appropriate polyester resin and reduceBenzoin¡¯s doage.
4. F125 can be dissolved in water, please keep away from water, and keep the heal airproof to avoid dampness.
|
0 (#0) |
0 |
2007.06.07 |
|
Coatings
 |
Polyamide Powder
See above |
0 (#0) |
375 |
2007.05.25 |
|
Coatings
|
Cold Applied,Cold Applied Tape,Cold Applied Tape Coating,Inner Tape
Tapes specifications:
1) T-140 with 0.38mm / 15mil thickness and 50 - 230mm width
2) T-150 with 0.51mm / 20mil thickness and 50 - 230mm width
3) T-165 with 0.64mm / 25mil thickness and 50 - 230mm width
4) T-180 with 0.76mm / 30mil thickness and 50 - 230mm width
5) T-1100 with 1.02mm / 40mil thickness and 50 - 230mm width
6) T-1130 with 1.27mm / 50mil thickness and 50 - 230mm width |
0 (#0) |
401 |
2007.04.17 |
|
Coatings
|
Cold Applied Tape,Cold Applied Tape Coating,Cold Applied Adhesive,Inner Tape
Tapes specifications:
1) T-140 with 0.38mm / 15mil thickness and 50 - 230mm width
2) T-150 with 0.51mm / 20mil thickness and 50 - 230mm width
3) T-165 with 0.64mm / 25mil thickness and 50 - 230mm width
4) T-180 with 0.76mm / 30mil thickness and 50 - 230mm width
5) T-1100 with 1.02mm / 40mil thickness and 50 - 230mm width
6) T-1130 with 1.27mm / 50mil thickness and 50 - 230mm width |
0 (#0) |
369 |
2007.04.17 |
|
Coatings
|
Anti-Corrosion Tape,Anti-Corrosion Product,Anti-Corrosion Material,Inner Tape
Tapes specifications:
1) T-140 with 0.38mm / 15mil thickness and 50 - 230mm width
2) T-150 with 0.51mm / 20mil thickness and 50 - 230mm width
3) T-165 with 0.64mm / 25mil thickness and 50 - 230mm width
4) T-180 with 0.76mm / 30mil thickness and 50 - 230mm width
5) T-1100 with 1.02mm / 40mil thickness and 50 - 230mm width
6) T-1130 with 1.27mm / 50mil thickness and 50 - 230mm width |
0 (#0) |
414 |
2007.04.17 |
|
 Prev 25 1 2 Next 25  | | Page 1 of total 2 pages | | x100 Index: 1 |
|
