| Directory |
Trade Leads |
Rated |
Visits |
Date |
Images |
Organic Chemical Materials
 |
 decabromodiphenyl ethane
Application　
As environment-friendly flame retardant without diphenyl Oxide unit, It has good thermal and light stability and can be used in PE, PP, PBT, epoxy resin, silicate rubber, three basic ethyl naphthalene, polyester fiber and cotton fiber etc. |
0 (#0) |
14 |
2008.06.28 |
 |
Organic Chemical Materials
 |
PARA PHENYLENEDIAMINE CAS# 106-50-3
Specifications for Para Phenylene Diamine (PPD)
(White)
CAS No. 106-50-3
Physical Appearance White- Lumps/Powder
Purity (By GLC %) 99.8% Min
M.P 139 deg c to 140 deg c
|
0 (#0) |
38 |
2008.06.18 |
 |
Organic Chemical Materials
|
sell P-Nitro chlorobenzene
Specification:
P-Nitro chlorobenzene: 98.0% min.
M-chloronitrobenzene, O-chloronitrobenzene: 1.5% max.
Low boiling: 0.2% max.
Moisture: 0.10% max.
|
0 (#0) |
39 |
2008.05.29 |
|
Organic Chemical Materials
|
sell O-Nitrochlorobenzene
Standard
Standard name Standard
Best quality Qualified product
Appearance Faint yellow to yellow casting body or oily liquid
Doing solidification point ℃ ≥ 31.7 31.7
ONCB % ≥ 99.0 98.5
PNCB & MNCB % ≤ 1.0 1.5
Low Bolier % ≤ 0.1 0.1
High Boiler % ≤ 0.1 0.1
Water % ≤ 0.1 0.2
2-Nitrochlorobenzene % ≤ 0.05 0.2
Sulphated ≤ 0.1 0.1
|
0 (#0) |
35 |
2008.05.29 |
|
Organic Chemical Materials
|
sell Guaethol
Melting Point: 20-25 degree
Boiling Point: 216-217 degree
Flash Point: 91degree
Appearance: Slightly yellow clear liquid or crystalline mass
Purity: 99.5% min.
|
0 (#0) |
22 |
2008.05.29 |
|
Organic Chemical Materials
|
sell O-Nitroanisole
purity: ≥99.0%
nature : a colorless to pale yellow flammable liquid.
melting point :9.4 ? C,
boiling point of 277? C (272-273? C) ,150.5-151? C (2.53kPa), 134? C (1.2kPa),
density:1.2540 (20 / 4 ? C)
refractive index .5620.
Soluble ethanol and ether, do not dissolve in water. With the water vapor can be volatile.
|
0 (#0) |
33 |
2008.05.29 |
|
Organic Chemical Materials
|
sell O-Anisidine
Appearance: Light yellow oily liquid
O-Anisidine≥99.0%
P-Aminoanisole≤0.5%
2-Chloroaniline≤0.5%
|
0 (#0) |
24 |
2008.05.29 |
|
Organic Chemical Materials
|
sell Ethyl Vanillin
Specifications:
Appearance: White to slightly yellow needle-like crystal or crystal powder.
Fragrance: Similar to Vanilla Beans, stronger than Vanillin.
Solubility (25Deg.C): 1g of Ethyl Vanillin is soluble in 3ml of 95% Ethanol and the solution should be transparent.
Melting point: 76.0-78.0Deg.C
Content: 99% min.
Loss on drying: 0.5% max.
As: 0.0003% max.
Heavy metal (based on Pb): 0.001% max.
|
0 (#0) |
27 |
2008.05.29 |
|
Organic Chemical Materials
|
1-(3-Trifluoromethylphenyl)piperazine HCl, TFMPP
Other name: TFMPP
CAS: 16015-69-3
Molecular Formula: C11H13F3N2.Cl
Molecular Weight: 266.69
White to allmost white crystalline powder
Purity (HPLC): 99.0% Min.
Loss on drying: 0.5% Max.
Residue on ignition: 0.5% Max
|
0 (#0) |
62 |
2008.05.20 |
|
Organic Chemical Materials
|
D-ribose
D-ribose
Product Type: Food and feed additives
Main Specifications: no data
CAS NO:
no data
Packing: no data
Uses: no data
Usages: no data
D-ribose Description:
|
0 (#0) |
30 |
2008.05.16 |
|
Organic Chemical Materials
|
N-octyl-isothiazolone
N-octyl-isothiazolone
Product Type: Organic chemicals and derivatives
Main Specifications: no data
CAS NO:
26530-20-1
Packing: no data
Uses: no data
Usages: Recommended use levels are between 0.3 1.0% base on the wet formulation weight
N-octyl-isothiazolone Description:
2-nocty1-4-isotHiazoline-3-one
CAS Registry Number 26530-20-1
Molecular Formula C11H19NOS
Molecular Weight 213.33
Specifications:
Text item Standard
Physical Form: Transparent to Amber Liquid
%Actives: 45% min
Specific Gravity 1.1 Max
Neat pH 4.0-6.0
Water % 0.5 max
Properties : OIT-45 is used primarily as a dry-film mildew protector for paint, coatings, stains, paper, plastics, wood, shoes, etc. Other applications include adhesives, metalworking fluids and printing inks. It should be incorporated into water-based or solvent-based formulations at any stage of production. The product exhibits good stability with ionic surfactants and emulsifiers.
Usages: Recommended use levels are between 0.3 ? 1.0% base on the wet formulation weight.
|
0 (#0) |
70 |
2008.05.16 |
|
Organic Chemical Materials
|
Isothiazolinones
Isothiazolinones
Product Type: Organic chemicals and derivatives
Main Specifications: no data
CAS NO:
26172-55-4/2682-20-4
Packing: 250kg poly drums.
Uses: no data
Usages: HB-CIT/MIT is widely use in cosmetics, personalcare, adhesives,
Isothiazolinones Description: Product Description
HB-CIT/MIT biocide.The active ingredient provides broad-spectrum activivty against common bacteria and fungi. It is provied by EPA and FDA for industrial and cosmetic applications.
CAS NO:26172-55-4/2682-20-4
Trade name:4-isothiazolin-3-one,5-chloro-2-methyl;3(2H)-isothiazolone,5-chloro-2-methyl;5-chloro-2-methyl-4-isothiazolin-3-one;Kathon CG 5243;3(2H)-isothiazolone,2-methyl-2-methyl-3(2H)-isothiazolone;
2-methyl-4-isothiazolin-3-one,3(2H)-isothiazolone.
Molecular formula:C4H5NOS/C4H4CINOS
Molecular weight:115.16/149.59
Product Specification/Models
Appearance:pale yellow liquid;
Active content 13.9-14.5% min;
CMI:10.1% MIN;
MI:2.6% min;
Specific Gravity:1.26-1.33;
PH value:1-3.
Application
HB-CIT/MIT is widely use in cosmetics, personalcare, adhesives,
latex, emulsion, pigments, paints,slurries, water-based
formulations,aqueous metalworking, inks, etc. It is highly
recommended for water containing systems with PH 2 to 9.
|
0 (#0) |
77 |
2009.05.16 |
|
Organic Chemical Materials
|
Tri-iso-octyl Phosphate
Tri-iso-octyl Phosphate
Product Type: Catalysts and chemical agents
Main Specifications: no data
CAS NO:
no data
Packing: ISO-TANK or 180kg iron drums
Uses: no data
Usages: Mainly used as processing solvent,instead of hydroterpineol,for production of hydrogen peroxide by anthraquinone process. It is an ideal solvent in this process, for its low volatility and good extration distribution coeffeient.Also as a cold-resisting an
|
0 (#0) |
34 |
2008.05.17 |
|
Organic Chemical Materials
|
Dimethyl phthalate
Dimethyl phthalate
Product Type: Catalysts and chemical agents
Main Specifications: no data
CAS NO:
no data
Packing: ISO-TANKS or 200kg iron drums
Uses: no data
Usages: A member of the phthalic acid ester plasticizer ,imparts flexibility and impacts strength of plastics.Used as a solvent in lacquer and paint as a dye carrier,as a textile lubricating agent and solid rocket propellent .It is also used as an ingredient of i
|
0 (#0) |
40 |
2008.05.17 |
|
Organic Chemical Materials
|
Phenalkamine Epoxy Curing Agent MEIDONG MD 2015C
ANALYSIS TYPICAL VALUES TEST METHODS
1. Viscosity (mPa?s, at 25℃) 10000-18000 CS 107
2. Solids (%, 100-v.loss) 73-77 CS 118
3. Gardner Color 17 max CS 112
4. Amine Value (mg KOH/g) 190-230 CS 113
5.AHEW 171 -
6. Recommended PHR (EEW=190) 85-95 -
|
0 (#0) |
39 |
2008.05.13 |
|
Organic Chemical Materials
|
hexamine urotropine
HEXAMETHYLENETETRAMINE (HEXAMINE) is a white crystalline powder with slight amine odor.
Applications: Vulcanizing agent and rubber blowing agent,used as a dye fixative and in the preservation of hides、Smokeless pellets. Stabilizer for oils and synthetic resin、 Surface treatment,Vulcanizing rubber. Additives in deodorizing powder. Anti-corrosive agent in steel. Absorption of poisonous gases. Anti-caking agent for prilled urea. Disinfectant. Antibacterial agent. Explosives (RDX), (HMX), (HMTA).
|
0 (#0) |
39 |
2008.05.08 |
|
Organic Chemical Materials
|
dpt blowing agent foaming agents h vesicant
Specifications : in accordance with ministerial standards: HG2-1188-78.
|
0 (#0) |
32 |
2008.05.08 |
|
Organic Chemical Materials
|
Trimethoxymethane Cas No149-73-5
Trimethoxymethane Cas No149-73-5
Synonyms:
Methyl Orthoformate; Trimethoxymethane; Trimethyl Orthoformate
Molecular formula:C4H10O3
Molecular weight:106.12
Product Specifications:
Appearance: colorless transparent
Content: 99% min
Application
It is Organic synthetic intermediate. It can produce vitamin B1, bactericide and sulfanilamide agent, or used as dehydrant of PU and epoxy resin, it also can be used in the synthesis of flavor.
|
0 (#0) |
41 |
2008.04.29 |
|
Organic Chemical Materials
|
1,1,1,3,3,3-Hexafluoro-2-propanol
Product Name: 1,1,1,3,3,3-Hexafluoro-2-propanol
Alias: 1,1,1,3,3,3-Hexafluoroisopropanol; HFIP; 1,1,1,3,3,3-Hexafluoro propan-2-ol
Molecular Formula: C3H2F6O
Molecular Weight: 168.04
CAS NO.: 920-66-1
EINECS NO.: 213-059-4
Properties
Density: 1.596
M.P.: -4?C
B.P.: 59?C
Refractive Index: 1.274-1.277
Solubility in Water: 1000 g/L (25?C)
Safety Data
Hazard Symbols: C
Risk Codes: R20/22;R34
Safety Description: S26;S36/37/39;S45
IMDG: UN 2922
Standard and packing explanation
Packing: 50/80/250kg steel-plastic drum
Standard: enterprise standard
Content: ≥99.5% |
0 (#0) |
33 |
2008.04.25 |
|
Organic Chemical Materials
|
Ethyl bromodifluoroacetate & Valproic Acid
Product Name: Ethyl bromodifluoroacetate
Alias: Ethylbromodifluoroacetate
Molecular Formula: C4H5BrF2O2
Molecular Weight: 202.98
CAS NO.: 667-27-6
EINECS NO.: 211-567-0
Properties
Density: 1.583
B.P.: 112?C
Refractive Index: 1.386-1.388
Flash Point: 21?C
Safety Data
Hazard Symbols: C
Risk Codes: R10;R34
Safety Description: S16;S26;S36/37/39;S45
IMDG: UN 2924
Packing: 50/80kg plastic-metal pail
Standard: enterprise standard
Content: ≥99% |
0 (#0) |
33 |
2008.04.25 |
|
Organic Chemical Materials
|
3-Amino-2-chloropyridine &2-Chloro-3-hydroxypyridine& 2-chloronicotinamide
3-Amino-2-chloropyridine
[CAS NO.]:6298-19-7
　[Molecular formula]:C5H5ClN2
　[Molecular weight]:128.5
　[Appearance]: white to yellowish crystal
　[Purity]:99.0min.
　[M.P.]:(?C)75-78(melting range less than 2)
2-Chloro-3-hydroxypyridine;2-Chloro-3-pyridino
[CAS NO.]:6636-78-8
　[Molecular formula]:C5H4ClNO
　[Molecular weight]:129.5
　[Appearance]: off-white to yellowish crystal
　[Purity]:99.0 min
　[M.P.]:(℃)168-170
|
0 (#0) |
31 |
2008.04.25 |
|
Organic Chemical Materials
|
sell 2,6-Dimethylbenzoic acid
CAS ]:632-46-2
　[Assay]:= 98%
　[Molecular formula]: C9H10O2
　[Molecular weight]:150.17
　[M.P.]:114-11 7 |
0 (#0) |
30 |
2008.04.25 |
|
Organic Chemical Materials
|
sell P-Hydroxybenzoic acid
Trade name: P-Hydroxybenzoic acid
Molecular formula: C7H6O3
Molecular weight: 138.13
Structural formula: HOCOOH
Properties: white crystal powder
Quality standard:
ITEMS SPECIFICATONS
Liquid crystal grade Industrial grade
Appearance: white crystal powder white crystal powder
Color: < 30 APHA 40APHA
Melting point(℃): 214-217 213-217
Solubility: clear, transparent, Colorless clear, transparent, Colorless
Methanol insoluble matter
Ug/g ≤ 50
Assay (titration method)% ≥ 99.5 ≥99.0
Assay (GC) % ≥ 99.5 ≥ 99.0
Salicylic acid (GC) % ≤ 0.02 ≤ 0.10
Benzene powder(GC) % ≤0.01 ≤ 0.10
Loss on drying % ≤ 0.20 ≤ 0.50
Ash % ≤0.02 0.15
Sulfate
Ug/g ≤ 50 ≤ 500
Chloride
Ug/g ≤ 50 ≤ 200
potassium ion
Ug/g ≤ 10
Sodium ion
Ug/g ≤ 10
Ferric ion
Ug/g ≤ 10
Uses: used as antiseptic, dye, drug & plastic injection intermediate, or used in production of Nipagin Esters, high molecular Liquid crystal polymer and pesticide intermediate.
Packing: 25Kg in plastic bag lined woven bag. Kept in cool and dry place.
|
0 (#0) |
29 |
2008.04.25 |
|
Organic Chemical Materials
|
sell 4-Hydroxybenzonitrile
Trade name: 4-Cyano phenol
Molecular formula: C7H5NO
Molecular weight: 119.12
Structural formula: HOCN
Properties: white or light yellow scaly crystal or crystalline powder, Melting point 110?~113?, Boiling point 145?/133Pa
Quality standard:
ITEMS
SPECIFICATONS
Liquid crystal grade
Industrial grade
Characters
white scaly crystal
white crystalline powder
white or light yellow crystal or crystalline powder
white crystalline powder
Purity (HPLC)(%)
>99.5
≥99
Melting point(℃)
111~113
110~113
Loss on drying(%) ≤0.2
≤0.5
Uses: It is one kind of important fine organic chemical material & intermediate.
widely used in the synthesis of drug, perfumery, pesticide, Liquid crystal material & inhibitor.
Packing: 25Kg/carton ( lined with plastic bag) 50Kg/woven bag ( lined with plastic bag)
|
0 (#0) |
29 |
2008.04.25 |
|
Organic Chemical Materials
|
CMS CARBOXYMETHYL STARCH
LZ-01, 02, 03, 04 |
0 (#0) |
79 |
2008.03.24 |
|
Prev 25 1 