| Directory |
Trade Leads |
Rated |
Visits |
Date |
Images |
Chemical Machinery
 |
 Pulse Air Mixing System
Contact us for more information |
0 (#0) |
35 |
2008.06.10 |
 |
Chemical Machinery
 |
SE;; glass-lined reactor
glass-lined and stainless steel reactor with the capacity 50-30000L.
Corrosion Resistance Stability: Very high corrosion resistance against inorganic acid, organic acid, organic solvent with different concentration and weak base, but not applicable to alkali, hydrofluoric acid, fluoride-bearing medium and phosphoric acid with concentration above 30% at temperature over 180?.
Resistance to Impact: 220-10-3J.
Thermal Shock Resistance: Resistance to sudden cooling 110?, Resistance to sudden heating 120?.
Insulation Performance: The enamel surface should be strictly tested at 20KV.
If you want to know more, please click our website.
|
0 (#0) |
62 |
2008.04.24 |
|
Chemical Machinery
 |
sell separator
GQ75
GQ105
GQ150
GF75
GF105
GFX105 |
0 (#0) |
161 |
2007.09.27 |
 |
Chemical Machinery
|
SO3 Sulfonation Plant
SO3 Sulfonation Plant
Multi-tube falling film sulfonation (sulfation) reactor is used in this plant. The organic feed materials include DDB, LAB, fatty alcohols, laurel ether,olefins etc. Two control alternatives are available: conventional or computer controlled. The plant is composed of following units:Air drying, Sulfur melting and dosing, Sulfur burning and SO3 generation , Sulfonation/sulfationNeutralization, Exhaust gas treatment Capacity: 500 kg/h to 3,000 kg/h.
|
0 (#0) |
282 |
2007.09.19 |
|
Chemical Machinery
|
Oil & Fats Refining and Hydrolyzing Equipment
Oil & Fats Refining and Hydrolyzing Equipment
Technology and equipment in the plant for preparing fatty acid, and glycerin from sweet water can be supplied. Natural oil and fats can be used to produce mixed fatty acids, and industrial glycerin and pharmaceutical glycerin as by-products at same time. Refining Hydrolyzing Distillation Fats Refined fats Crude Fatty acids Refined fatty acids Distillation Sweet water Crude glycerin Distillation Distillation Pharmaceutical glycerin Industrial glycerin Capacity: 10 t fats per day to 100 t fats per day 1 t glycerin per day to 15 t glycerin per day Oil and fats refining units Heat exchangers Filters Deodorizer Computer control The oil and fats refining unit is used to remove impurities from oil and fats, to meet the requirements of toilet or laundry soap production. The sections in this unit are: Oil and fats melting Hydration Acid refining Alkaline refining Bleaching Deodorizing The above-mentioned section(s) is selected according to the grade of oil and fats to be used. Capacity: 50 t/d to 600 t/d.
|
0 (#0) |
253 |
2007.09.19 |
|
Chemical Machinery
|
Liquid Detergent Plant
Liquid Detergent Plant
Batch operation mode is used in this line. The line is composed of following units: High-efficiency emulsifying and homogenizing unit Water treatment unit and vacuum unit Filtering, filling and packaging unit Following items can be produced by this line: Textile liquid detergent: for washing woven or knitted outside materials and garments and beddings made from them Tableware cleaner: for washing of tableware, fruits and vegetables Shampoo and skin cleaner: hair shampoo, hair savior, body lotion, hand washing liquid, foot washing liquid, face lotion, mouth lotion etc. House hard face cleaner: for cleaning sanitary hardware, furniture, wall etc.
|
0 (#0) |
212 |
2007.09.19 |
|
Chemical Machinery
|
Toothpaste Plant
Toothpaste Plant
Different toothpastes can be produced with this line. The operation can be manual, semi-automatic and fully automatic. Capacity is from 3,000,000 tube/a to 200,000,000 tube/a, when the weight per each toothpaste tube is from 50 g to 300 g.
|
0 (#0) |
191 |
2007.09.19 |
|
Chemical Machinery
|
Cosmetics Plant
Cosmetics Plant
The cosmetics line is composed of vacuum emulsification, water treatment, product storage, pumping and filling units. Following items are produced. Creams: such as vanish cream, skin moistening cream, cold cream, honey cream etc. Sachets: powder cakes, toilet powder, fragrant powder etc. Dressing agents: lipsticks, blushes, eye make-ups, fingernail oils and face-care membranes etc. Perfumes and toilet waters: perfume, toilet water, and heat rash water etc.
|
0 (#0) |
208 |
2007.09.19 |
|
Chemical Machinery
|
Toilet Soap and Laundry Soap Equipment
Toilet Soap and Laundry Soap Equipment
The soap base can be produced by kettle saponification or continuous saponification of oil and fats. The liquid soap is vacuum dried. The soap noodles obtained is added with perfume, anti-oxidation agent etc. in a mixer, then goes through milling and plodding system to form toilet soap or laundry soap of different shapes and formulations. The whole plant includes oil and fats refining unit, saponification unit, vacuum drying unit, finishing line and packaging section. Complete soap plant can be supplied, or according customer's requirements, only finishing line beginning from soap noodles bought from outside to the packaging machine.
|
0 (#0) |
239 |
2007.09.19 |
|
Chemical Machinery
|
Detergent Powder Plant
Detergent Powder Plant
Three kinds of plants can be supplied according to the required bulk density of product powder. 1. Plant with spray drying tower: The final product detergent powder from this kind of plant will have bulk density of 0.25 to 0.35. 2. Plant with agglomerator: mainly for producing high-density detergent powder with bulk density of 0.45 to 0.80. 3. Plant with both spray drying tower and agglomerator: combination of the technical advantages of above two kinds of plants, capable of producing both low-density and high-density detergent powders by one plant. Manual or fully automatic computer controlled system can be used in the above-mentioned plants, depending on customer's requirements. The capacity of the plants is 3,000 t/a to 200,000 t/a. The operation mode can be manually and computer controlled. The supply range is from renovation of existing plant to totally new plants. Environmental impact: no wastewater is drained to outside.
|
0 (#0) |
259 |
2007.09.19 |
|
Chemical Machinery
|
sell loading arm, floating roof, quick release mooring hooks, platform, folding ladder
My company is a Chinese Professional Petrochemical Equipment Manufacturer. Our main products are loading arm, marine loading arm, floating roof, quick release mooring hooks, platform, folding ladder and etc. We can provide you all the products at favourable price and high quality.
I’m looking forward to the cooperation with you in the future!
Best Regards,
Heliwen
(International Trade Director)
Lianyungang Zhenxing (Group) Petrochemical Equipment Manufacture Co., Ltd.
http://www.zxpeco.com
Add: High-Tech Development Zone, Lianyungang, China
Zip: 222006
Email: xinpuheliwen@yahoo.com.cn
Tel: +86-518-85515779
Fax: +86-518-85515327
Skype: heliwen1
Yahoo: xinpuheliwen
Contact: Ms Heliwen
|
0 (#0) |
183 |
2007.09.12 |
|
Chemical Machinery
 |
Manual Paint Dispenser
Application:water or oil colorant(1-24 types)
Canister capacity:2.3L/1.75L
Maximal discharge rate:2fluid ounce
Accuracy:1/192 and 1/384 fluid ounce is optional
Working power:220V frequency :50/60Hz
Power supply:40W
Net weight:80Kg
Case size:1350(H)×860(W)×860(D)mm
Packing size:1400(H)×950(W)×950(D)mm
Container loading:21set/20' 51set/40' GP 58set/40; HQ
|
0 (#0) |
218 |
2007.08.25 |
|
Chemical Machinery
|
Automatic Clamping Paint Shaker
Case size:1060(H)×700(W)×680(D)mm
Packing size:1200(H)×840(W)×810(D)mm
Case weight:210Kg
Gross weight:245Kg
Can size:360(H)×360(W)×350(D)mm
Can compress-board readjust range:90-400mm
Shaking time:60/120/240s
Applicable range:1-35Kg
Pressure:3500N
Power：750W
Speed:1400r/min
Shaking frequency:680-710t/min
Power supply:220V±10% 50Hz 10A
|
0 (#0) |
246 |
2007.08.25 |
|
Chemical Machinery
|
Automatic Rotating Mixer
Applicable range:0.5-20L(paint in drum)
Height in the drum:7cm to 39cm,
Diameter of the drum:7cm to 30cm
Revolution speed:60-200r/min
Rotation speed:120-400r/min
Power supply:750W
Net weight:180Kg
Gross weight:210Kg
Case size:950(H)×820(W)×750(D)mm
Packing size:1200(H)×900(W)×810(D)mm
Feature of KD-30A:
|
0 (#0) |
199 |
2007.08.25 |
|
Chemical Machinery
|
Rotaing Mixer
Applicable range:0.5-20L(paint in drum).
Height in the drum:7cm to 39cm,Diameter of the drum:7cm to 30cm.
Revolution speed:130/min
Rotation speed:260/min
Power supply:750W
Net weight:200Kg
Gross weight:240Kg
Time set:0-15min
Case size:1050(H)×800(W)×750(D)mm
Packing size: 1150(H)×900(W)×850(D)mm
|
0 (#0) |
187 |
2007.08.25 |
|
Chemical Machinery
|
Manual Clamping Paint Shaker
Applicable range:0.5-20L(paint in drum)
Applicable height of drum range:80-410mm
Shaking frequency:710t/min
Working power:220V 50Hz
Power supply:0.75Kw
Net weight:195Kg
Gross weight:240Kg
Case size:1070(H)×820(W)×750(D)mm
Packing size:1200(H)×900(W)×810(D)mm
|
0 (#0) |
203 |
2007.08.25 |
|
Chemical Machinery
 |
Serrated Gaskets
Serrated Metallic Gasket is the preferred gasket when improved performance at low seating stresses is required. It features excellent anti-blow-out properties linked with the reliably of a solid metal-to-metal seal combined with a soft sealing face to provide a tighter joint. It is particularly suitable for applications where high temperature, pressures and fluctuating conditions are encountered. Non-metal cover layers ensure that flanges are not damaged, even at extreme loads. This gasket is an ideal replacement for problem applications associated with jacketed gaskets, for heat exchangers, vessels and reactors and various flange connections. |
0 (#0) |
243 |
2007.04.20 |
|
Chemical Machinery
|
PTFE Gaskets
Pure PTFE Gasket is made by cutting PTFE stick, pipe and sheet into flat shape, v shape gasket or valve annulus. It has 100% PTFE structure. It can bear the most bitter chemical medium, and has good anti-creeping performance.
PTFE Envelope Gasket consists of asbestos, non-asbestos, rubber etc. cushion material having exposed surface covered with PTFE envelope. Depends on excellent corrosion resistance and compressive resilient, it is widely used in strong alkalis, cryogenic fluids, oxygen, chlorine gas and disallowable polluted medium etc.
Expanded PTFE gasket is a replacement of asbestos. It is anti-creeping, anti-cold-flow, anti-low-temperature. Under small pre-stress force, it can bear great internal pressure even in an environment of changing pressure. It is the best suit the condition with rough and fragile flange and alternately-changing temperature.
|
0 (#0) |
251 |
2007.04.20 |
|
Chemical Machinery
|
Ring Joint Gaskets
Ring joint gaskets are manufactured in different solid metal types like soft iron, SS304/316/321 metal and other alloy items. They are used to stand high pressure and temperatures and they are employed where corrosive agents are present. Suitable for oil or gas pipe flange, pressure vessel, high speed joint face, valve with high temperature and high pressure.
|
0 (#0) |
307 |
2007.04.20 |
|
Chemical Machinery
|
Metal Jacketed Gasket
Specification:
Metal Jacketed gasket is made from graphite, ceramic, non-asbestos etc. filler covered with thin metal jacket such as stainless steel, carbon steel, copper etc., special used in sealing spots of heat exchanger, pressure vessel etc. this gaskets has highly resistance and is suitable for high assembly stress.
|
0 (#0) |
265 |
2007.04.20 |
|
Chemical Machinery
|
Graphite Gaskets
Graphite gaskets are cut from pure graphite sheet or graphite sheet with metal reinforcement, features excellent corrosion-resistance, high-and-low temperature resistance, good compression resilient and high intensity. It can be used as sealing elements of pipe, valve, pump, pressure vessel, heat exchanger and condenser, etc.
Reinforced Graphite Gasket with eyelet is wrapped with metallic stripe in the inner and outer circle borderline. Keep the former excellent performances and can be installed and disassembled conveniently without damage.
|
0 (#0) |
190 |
2007.04.20 |
|
Chemical Machinery
|
Gasket
Materials Available:
Filler Materials: Non-Asbestos, PTFE, Grafoil , Ceramic
Windings Strips: 304, 316 Stainless Steel，Hastalloy, Alloy 20, Monel, Nickel, Inconel, Incoloy, Duplex SS, Zirconium,Tantalum, Copper, Phis-Bronze, Carbon Steel
Guide Ring Materials: Carbon Steel，most stainless grades, Inconel, Monel, Titanium, Nickel, Alloy 20, and Hastalloy.
|
0 (#0) |
272 |
2007.04.20 |
|
Chemical Machinery
|
PET PE BOPP BOPA Film coated with PVDC on single/double side
PET PE BOPP BOPA Film coated with PVDC on single/double side |
0 (#0) |
333 |
2007.02.08 |
|
Chemical Machinery
|
430H type for printing disposal
Machine body volume:1300 x 640 x 420 (length x width x height) Machine frame excluded |
0 (#0) |
307 |
2007.02.08 |
|
Chemical Machinery
|
430H type industrial hurtless detect
.Machine body volume:1300 x 640 x 420 (length x width x height) Machine frame excluded |
0 (#0) |
288 |
2007.02.08 |
|
 Prev 25 1 2 Next 25  | | Page 1 of total 2 pages | | x100 Index: 1 |
|
