| Directory |
Trade Leads |
Rated |
Visits |
Date |
Images |
Industrial Materials
 |
 Stainless Steel Cut Wire Shot
Stainless Steel Cut Wire Shot:
Size: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm 0.8mm
Chemical Composition:
C: 0.12% max
Mn: 2.00% max
Si: 1.00% max
Cr: 17--19%
Ni: 7--10%
S: 0.03% max
P: 0.035% max
Hardness: 40-60HRC
Density: 7.8g/cm3
Packing: 25kgs/bag, 40 bags/ton/pallet or 1000kgs/big bag
|
0 (#0) |
23 |
2008.11.08 |
 |
Industrial Materials
|
Steel Cut Wire Shot
Steel Cut Wire Shot
Size: 1.0mm, 1.5mm
Chemical composition:
C: 0.70-1.2
Mn: 0.60-1.2
Si: 0.40-1.2
P: 0.05 max
S: 0.05 max
Hardness:
1.0mm 51-53HRC
1.5mm 41-45HRC
Standard: SAE J827
Packing: 25kgs/bag, 40bags/ton/pallet or 1000kgs/big bag.
|
0 (#0) |
27 |
2008.11.08 |
|
Industrial Materials
|
Steel Grit
CAST STEEL GRIT:
Size: G14, G16, G18, G25, G40, G50, G80, G120
Chemical composition:
C: 0.70-1.20%
Mn: 0.60-1.20%
Si: 0.40-1.20%
P: 0.05 %max
S: 0.05%max
Hardness:
GP: 42-50HRC
GL: 52-56HRC
GH: 56-60HRC
Standard: SAE J827
Packing: 25kgs/bag, 40bags/ton/pallet or 1000kgs/big bag
|
0 (#0) |
29 |
2008.11.08 |
|
Industrial Materials
 |
valves
BALL VALVE, GATE VALVE, GLOBE VALVE, CHECK VALVE, SWING CHECK VALVE, WAFER CHECK VALVE, CONDUIT GATE VALVE, KNIFE EDGE GATE VALVE, BUTTERFLY VALVE, FORGED STEEL GATE/GLOBE/CHECK VALVE. |
0 (#0) |
17 |
2008.11.07 |
|
Industrial Materials
 |
Countersunk Head Insert Nuts
http://www.filrox.com.tw/e/p02-all.htm |
0 (#0) |
22 |
2008.10.16 |
|
Industrial Materials
|
corner board machinery
YA-IV edge protector machinery adopted advanced international the PLC computer programming technology, frequency Control, man-machine interface parameters input the display control system, combined the top of the international Servo cutting system, ensure that the ultra-precision cutting. The machinery high grade of automation, Stable and reliable high-speed working, It is the most advanced paper edge protection line in domestic, and the only via to a number of national patents for the paper edge protection line. The working principle of this production line is that: the base paper via the paper stand feeding holder,through the glue rack coated and gluing, and then through the pressure wheel sets to received and powerful rolling to composing angle, and the finally as synchronous hydraulic-cutting for the finished products after cutting stand.
Parameters:
Arrange of Production : Width 25-100MM or tri-angle
Thickness :2-8MM Length: 50-9900MM
|
0 (#0) |
13 |
2008.10.15 |
 |
Industrial Materials
|
angle board machinery
YA-IV edge protector machinery adopted advanced international the PLC computer programming technology, frequency Control, man-machine interface parameters input the display control system, combined the top of the international Servo cutting system, ensure that the ultra-precision cutting. The machinery high grade of automation, Stable and reliable high-speed working, It is the most advanced paper edge protection line in domestic, and the only via to a number of national patents for the paper edge protection line. The working principle of this production line is that: the base paper via the paper stand feeding holder,through the glue rack coated and gluing, and then through the pressure wheel sets to received and powerful rolling to composing angle, and the finally as synchronous hydraulic-cutting for the finished products after cutting stand.
|
0 (#0) |
15 |
2008.10.15 |
|
Industrial Materials
|
supply high quality of metalworking tools
For the diamond metalworking tools,we have PCD/CBN insert,Solid CBN insert,coated carbide insert,also we also produce unstandard cutting tools upon your drawing. We have two auto grinding machine from Switerland(Ewag). If you interested in it,you could test our samples first,then you could decide whether to do business with us. |
0 (#0) |
16 |
2008.10.13 |
|
Industrial Materials
|
Spring washer
GB7244, GB93; DIN127-A, DIN127-B,; ASTM F959; JIS B125 or other standards required by clients |
0 (#0) |
9 |
2008.10.07 |
|
Industrial Materials
|
Surface Condition Mini Disc
Size Grit Maxrm Type
1" Coarse, Medium, Very fine 30.000 R
1-1/2" Coarse, Medium, very fine 30.000 R
2" Coarse, Medium, Very fine 30.000 R
3" Coarse, Medium, Very fine 25.000 R
Grit Size: Coarse Maroon
Medium Red
Fine Blue
|
0 (#0) |
26 |
2008.09.29 |
|
Industrial Materials
|
needle valve ,instrumentation valve ,gauge valve
FDG4-1 |
0 (#0) |
25 |
2008.09.26 |
|
Industrial Materials
|
supply All Kinds Of Muffler
Its products include bronze sintered filter elements,pneumatic components,one-way throttle valve,exhaust muffling throttle valve,muffler,mini governor muffler an so on. Our products sell well far abroad to Europe,America,southeast Asia and at home,including HongKong,Macao and Taiwan.Many large and medium scale factories in our country and 80%users adopt the pneumatic components fittings of our company.If you have the interest, please as soon as possible reply.
By the way , please tell me the specification and your email address.
Web: www.muffler-silencer.com
Email: sales@muffler-silencer.com |
0 (#0) |
31 |
2008.09.25 |
|
Industrial Materials
|
supply all types of plate heat exchanger
Technical parameter
Product model The rock drill welds the disc heat interchanger
Product model B3-12A
Monolithic heat transfer area 0．012m2
Maximum current capacity 4m3/h
Manufacture material 316l or 304 stainless steel
Welding material Purity 99.9% coppers or nickel
Slab wall thickness 0．3mm
Stagnates the liquid volume 0.018l/each channel
Biggest slab number 60
Design pressure 3.0Mpa
Test pressure 2.0MPa or 4.5MPa
Design temperature -195～+220℃
Connection way G1/4" ~3/4" Fluid side: ￠6.5 ￠19.2threads/weldings
Trades the quantity of heat 1-5KW
Application scope the water heater, the cold temperature testequipment, the small refrigeration equipment and so on
|
0 (#0) |
34 |
2008.09.25 |
|
Industrial Materials
|
Gate Valve
Ball valve
Check Valve
Gate Valve
Globe Valve
Butterfly Valve
|
0 (#0) |
33 |
2008.09.09 |
|
Industrial Materials
|
Chinasealings Group Inc. Provides Various High-Quality Seals
O-Ring: According to different working conditions, the materials of o-ring are nitrile rubber, silicone rubber, fluoro carbon rubber, etc. Specification Range: 2.8 mm (Inner Diameter)?1.9 mm (Section Diameter) ~ 499.5 mm (Inner Diameter)?8.4 mm (Section Diameter).
Oil Seal: According to different working conditions, the materials of oil seal are nitrile rubber, polyacrylate rubber, silicone rubber, fluoro carbon rubber, etc. Specification Range: 6 mm (Diameter of Axle) ?16 mm (Outer Diameter) ?7 mm (Width)~300 mm (Diameter of Axle) ?360 mm (Outer Diameter) ?25 mm (Width).
Hydraulic Seal: According to different working conditions, hydraulic seals can be divided into piston seal, rod seal and piston and rod seal, the materials are nitrile rubber, fluoro carbon rubber, polyurethane, etc. Specification Range: 18 mm (Outer Diameter) ?8 mm (Diameter of Axle) ?7.5 mm (Width)~332 mm (Outer Diameter) ?330 mm (Diameter of Axle)?24 mm (Width).
Wiper Scraper Seal, Support Ring and Wearing Ring: the materials are nitrile rubber, fluoro carbon rubber, cold-roll steel sheet, etc. Specification Range: 16 mm (Outer Diameter) ?6.3 mm (Diameter of Axle) ?7 mm (Width)~330 mm (Outer Diameter) ?300 mm (Diameter of Axle)?22 mm (Width).
Mechanical/ Packing/ Gasket Seal: the materials of mechanical seal are graphite, ceramic, slicon carbide, nitrile rubber, nitrile rubber hydride, fluoro carbon rubber, chromium-nickel steel, etc. The materials of packing seal are graphite, PTFE, asbestos, etc. Because of different size and standard, please contact us in time. The common materials of gasket seal are rubber, leather, asbestos, cork, PTFE, steel, iron, copper, stainless steel, etc. Size Range: Φ16 mm~Φ3000 mm. |
0 (#0) |
40 |
2008.08.09 |
|
Industrial Materials
|
ceramic bond wheel for polishing natural diamond
150x10x32x10
155x10x32x10
160x10x32x10
160x10x32x12
170x10x32x10
170x10x32x12
170x10x32x14
175x10x32x10
175x10x32x20
175x12x32x14
175x12x32x20 |
0 (#0) |
37 |
2008.07.26 |
|
Industrial Materials
|
sell forged ball check gate globe valves
Our main products:Gate Valve, Globe Valve, Check Valve, Ball Valve, Y-Globe Valve, Y-Strainer, Needle Valve,Knife gate valve etc.
Nominal Diameters:DN10~DN1000(3/8'-40').
Nominal Pressure:PN1.6~42.0Mpa( 150lb ~ 2500lb ).
Materials: A105, LF2, F5, F11, F22, F304, F 304L , F316, F 316L , WCB, WC6, WC9, CF 8M , CF3, CF 3M etc.
|
0 (#0) |
90 |
2008.07.21 |
|
Industrial Materials
|
Sell DIN444 Eye bolt 0043
The spherical surface is very smooth, the precision of screw thread is high. As accessory it can improve integrated quality for your product.
Material:medium carbon steel,stainless steel,structural alloy steel Technological process:cut precious after hot forging Specification:Common American system M8-M64 Grade: 4.6, 8.8,etc Plating: ZINC / BLACK OXIDE etc.
|
0 (#0) |
58 |
2008.07.19 |
|
Industrial Materials
|
Valves
We are leading merchant exporter of variety of Valves required in Automotives, trains, and other industrial machines.
We are also into customized sourcing (i.e. we supply our clients Valves and its parts as per their designs and specifications.)
|
0 (#0) |
88 |
2008.07.18 |
|
Industrial Materials
 |
We sell Auto and truck battery and Drained Lead
Auto and truck battery, Drained Lead Battery Scrap |
0 (#0) |
62 |
2008.07.13 |
|
Industrial Materials
|
sell edm filter
Filtered precision enactment: standard: 5um, special: 3um and 10um.
|
0 (#0) |
66 |
2008.06.05 |
|
Industrial Materials
|
Safety Footwear
1. Safety shoes comply with the requirements of EN 20345:2004 (S2) standards that are applied for safety shoes that have a metal protection for the toes having 200 joules strength. (Toe cap)
2. S2 which means have antistatic performance, heel have mechanical energy absorption, have strength in water repellency and water absorption.
|
0 (#0) |
59 |
2008.06.05 |
|
Industrial Materials
|
offer valve enquiry
Main products: Gate Valve, Globe Valve, Check Valve, Ball Valve, Throttle Valve, Cryogenic Valve, Y ? Globe Valve, Y ? Strainer etc.
Nominal Diameters: DN10~DN1000(3/8"-40?).
Nominal Pressure:PN1.6~42.0Mpa(150Lb~2500Lb).
Materials: A105, LF2, F5, F11, F22, F304, F304L, F316, F316L, WCB, WC6,WC9, CF8, CF8M, CF3, CF3M etc.
Standards: API602, ANSI B16.34, DIN, JIS, GB, JB, HG, BS etc,
Certification:API-6D 0752, CE, TS, SIRA ISO9001:2000.
|
0 (#0) |
61 |
2008.05.23 |
|
Industrial Materials
|
Vacuum Pump
ZS-1.5B |
0 (#0) |
55 |
2008.05.21 |
|
Industrial Materials
|
Compressor
ZR94KC-TFD-522 |
0 (#0) |
51 |
2008.05.21 |
|
 Prev 25 1 2 3 4 5 6 7 Next 25  | | Page 1 of total 7 pages | | x100 Index: 1 |
|
