| Directory |
Trade Leads |
Rated |
Visits |
Date |
Images |
Measurement and Meter
 |
 Landtek Ultrasonic Thickness Meter
Model: TM8812
Measuring range (metric/imperial): 1.2-225mm,0.05-9inch
Operating principle: ULTROSONIC
Materials measured: any hard materials, including steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene, PVC, gray cast iron, nodular cast iron and other materials
Sound velocity: 500-9000m/s
Lower limit steel pipes: ф15x2.0mm, ф20x3.0mm determined by the transducer
Calibration block: included
Resolution: 0.1mm
Accuracy: ?(0.5%n+0.1)
RS232C interface: with RS232C
Power supply: 4x1.5V AAA (UM-4)battery
Battery indicator: low battery indicator
Operating conditions:0-+45℃(32℉-104℉),≤90%RH
Dimensions: 120x62x30mm
weight: 164g(not including battery)
Optional accessories：Cable&software for RS-232C |
0 (#0) |
22 |
2008.07.07 |
 |
Measurement and Meter
|
Landtek Surface Roughness Meter
Display： 4 digits, 10 mm LCD, with blue backlight
Parameters: Ra, Rz
Display Range
Ra: 0.05-10.00um/1.000-400.0uinch
Rz: 0.020-100.0um/0.780-4000uinch
Accuracy: Not more than 10%
Fluctuation of display value: Not more than 6%
Sensor :
Test Principle: Inductance type
Radius of Probe Pin: 10um
Material of Probe Pin: Diamond
Measurement Force of Probe: 16mN(1.6gf)
Probe Angle: 90?
Vertical Radius of Guiding Head: 48mm
Maximum driving stroke: 17.5mm/0.7inch
Cutoff length (l): 0.25mm / 0.8mm / 2.5mm optional
Evaluation length: 1~5 cut off optional
Driving speed:
sampling length = 0.25mm Vt=0.135mm/s
sampling length = 0.8mm Vt=0.5mm/s
sampling length = 2.5mm Vt=1mm/s
returning Vt=1mm/s
Resolution : 0.001μm if reading ＜10μm
0.01μm if 10μm≤reading＜100μm
0.1μm if reading ≥100μm
Power Li-ion battery: rechargeable
Operating conditions: Temp. 0~50℃
Humidity <80%
Size：140x57x48 mm (5.5x2.2x1.9 inch)
Weight: about 420 g |
0 (#0) |
33 |
2008.07.07 |
|
Measurement and Meter
|
instrument valve ,needle valve, manifolds
5 valve manifold(valve block ,instrumentation valve ,gauge manifold,manifold valve)
orifice :4mm
pressure up to 6000psi
temperature up to 400oC
approximate weight :2.5kg
|
0 (#0) |
97 |
2008.06.09 |
 |
Measurement and Meter
|
Automotive Emission analyzer Gasboard-5020
Specification:
◆ Measurement range:
HC:0 - 9999ppm
CO:0 - 10%
CO2:0 - 20 %
O2:0 - 25%
NO:0 - 5000ppm
◆ Error:
HC :?12ppm or ?5% (relative)
CO :?0.06% or ?5% (relative)
CO2 : ?0.5% or ?5% (relative)
O2 : ?0.1% or ?5% (relative)
NO :?25ppm or ?4% (relative)
◆ Resolution:HC:1 ppm CO:0.01 % CO2:0.01 % O2:0.01 % NO:1 ppm
◆ Response time:Less than10s（NDIR）
◆ Warming up:10min
◆ Power: AC220V ?10%,50HZ?1HZ
◆ Weight:6.5kg
◆ Dimension:266mm(width) x 360mm(depth)x 183mm(height)
|
0 (#0) |
94 |
2008.06.03 |
|
Measurement and Meter
|
Portable Biogas Analyzer Gasboard-3200L
Specification:
 Measurement range
CH4:0-100% CO2:0-50% O2:0-25% H2S:0-9999ppm
 Precision:CO2/CH4:?2%,O2:?3%,H2S:?4%
 Resolution: CH4/CO2/O2:0.01% ,H2S: 1 ppm
 Respond time:Less than 20s
 Warm up: 10min
 Output: RS232
 Power: Rechargeable lithium cell inside
 Weight: 2Kg
 Dimension:225x172x61mm |
0 (#0) |
85 |
2008.06.03 |
|
Measurement and Meter
|
Biogas Analyzer Gasboard-3200
Specification:
 Measurement range CH4:0-100%,CO2:0-50%,O2:0-25%,H2S:0-9999ppm
 Precision:CO2/CH4:?2%,O2:?3%,H2S:?4%
 Resolution:CH4/CO2/O2:0.01% ,H2S: 1 PPm
 Respond time:Less than 20s
 Warm up: 10min
 Output: RS232
 Power: AC220V?10% 50Hz?1Hz
 Weight: 10Kg
 Dimension: Rack type19 inch 3U
|
0 (#0) |
55 |
2008.06.03 |
|
Measurement and Meter
|
panel mount ultrasonic flow meter
Our company is a professional Ultrasonic flow meter manufacturer, mail products including: Ultrasonic water meter. Ultrasonic Flow meter. Hand-Held Ultrasonic Flow Meter. Portable Ultrasonic Flow Meter. Ultrasonic level meter. Clamp-on Transducer, Insertion Transducer. |
0 (#0) |
48 |
2008.04.25 |
|
Measurement and Meter
|
protable ultrasonic flow meter
Chinese and English menu
No touching with liquid、small size
Apply to measuring every size pipe
Water, seawater, sewage, PH liquid, oils and other liquids
2?20 light LCD display, light type board
Inner Ni-H battery can work 10 hours、temperature （-20~60℃）
Accuracy : ?1%
Printer output and RS-232 output
Power :2W
A ex-proof box for using under bad condition
180?180?100mm 2kg
|
0 (#0) |
45 |
2008.04.25 |
|
Measurement and Meter
|
We sell Leeb Hardness Tester
PHL-200 |
0 (#0) |
51 |
2008.04.18 |
|
Measurement and Meter
|
we sell Superficial Rockwell Hardness Tester
PHR-1S, PHR-1ST, PHR-2S, PHR-4-2S |
0 (#0) |
52 |
2008.04.18 |
|
Measurement and Meter
|
We sell Webster Hardness Testers
W-20, W-20a, W-20b,W-B75, W-B75b, W-BB75, W-BB75b,W-B92 |
0 (#0) |
68 |
2008.04.18 |
|
Measurement and Meter
|
We sell portable Large rockwell hardness tester
PHR-1, PHR-2, PHR-4-2, PHR-4-4 |
0 (#0) |
77 |
2008.04.18 |
|
Measurement and Meter
|
Sell glass metering tube
Glass metering cone
The glass metering cone DN2～80 are the accessories for VA/FA/SA, GA24, DK800 series, it is convient to change the glass cone without changing the graduation outside.
|
0 (#0) |
59 |
2008.04.16 |
|
Measurement and Meter
|
Sell thermowell
The bushing is a equipment which is protecting the gauge. It's insulate gauge from medjum, and increase gauges's using life. We can maintain or replace the gauge expendiently.Whole drill type outside protector can be used in the higher pressure occassion and the steel tube type can be used in the lower pressure occasion.Consumers choose it rightly should according to the different occasion's using condition(temperature,pressure,velocity of flow and so on)
|
0 (#0) |
58 |
2008.04.16 |
|
Measurement and Meter
|
Sell TC/RTD
RTD measuring temperature use the priciple that the resistance of conductor semiconductor change according to the temperature. Its advantages are extreme accuracy. Long-distance lanuching, high or medium temperauure measuring.
Pt-RTD is characterized by its slimness, fexibility, fast thermal response time, shock resistance, high temperature, and high pressure resistance. It can be used for direct temperature measurement , or as inner core in assembly type RTD to replace traditional ones. Its temperature measuring range is -200～+500℃.
Regular RTD may cause explosion under certiain explosion atmosphere, , in such case, EPRTD must be used as temperature detector. This type of product is suitable to be used where the explosive vapor may be present in dⅡBT4 and dⅡCT5 areas.
TC measure temperature use the pyroolectricity. Its measuring range is large. And it can lanch long-distance. It use in measuring high or medium temperature.
MITC is slim, fexible, solid with fast response. It can be used for direct measurement, or used as inner element of assembled TC to replace the tradition one. It's suitable to use in narrow., inaccessible locations , and where, flexibility and fast response are required.
Regular TC may cause explosion under certiain explosion atmosphere , in such case, EPTC must be used as temperature detector. This type of product is suitable to be used where the explosive vapor may be present in dⅡBT4 and dⅡCT5 areas.
|
0 (#0) |
50 |
2008.04.16 |
|
Measurement and Meter
|
Sell glass industrial thermometers
Glass thermometer is a measuring gauge which made according to the priciple that thermal expansion and shrink. Its advantages are extreme accuracy, sensitive response and regged deponda bitity. Electrical contact Hg thermometer can send out the message when the temperature reach or exceed (lower) the setting temperature.
Style: V-shaped, metal bushing, adjustable angle，plastic shell glass submarine, iron shell submarine
Material of insert part: cast aluminum, copper, stainless steel or be customized
Usage: chemical,pharmacy,brewing,mechanical manufacturing ,scientific research and education system, etc.
Storted medium: mercury or organic liquid.
Measuring range: mercury -30 ～ 500℃
organic liquid (blue or red) -80 ～ 200℃
|
0 (#0) |
62 |
2008.04.16 |
|
Measurement and Meter
|
Sell bimetal thermometers
Bimetal thermometer is a measuring gauge which used bimetal piece as senor part to measure low or medium temperature. Compare to the glass thermometer, it has advantages as non-Hg, clear in reading ,durable. Widely used in machinery, chemical industry,textile,medicnery, foodstuffs,vessel and so on for measuring and controling the temperature.
1.Accuracy : 1.5
2.Measuring range :-80～+600℃
3.Thermal response time: ＜40s; if the diameter of the Protect =φ6mm, ＜30s
4.Stem pressure -rsistant : 6.4MPa
5.Protector material : 1Cr18Ni9Ti
Type:
1.electrical contact
2.adjustable angle
3.bimetal indication thermal rsistance/thermocouple
4.explosion-proof
|
0 (#0) |
55 |
2008.04.16 |
|
Measurement and Meter
|
Sell flowmeters
Flowmeters LZB,LZJ have simple structure with low press loss, corrosive resistant type using stainless steel or fluoroplastics can resistant most corrosive acid, alkali, axidizer and solvent. DN4～10 have hose connections and DN15～100 have flange connection or on request.
GA24, DK800, VA/FA/SA these models are manufactured by special technique and equipment of KROHNE company in German.In addition to the mm graduation scale and percentage scale on the glass cone, a replaceable scale with flow units can on request be fitting to the housing.
Flowmeter LZ are flowmeters for liquids and gases . You can mount it horizontally or vertically. There are models of local indicating, long-distance data transmission, corrosive resistant, with heating device, limit switch, explosion-proof and so on. Transmission has 0～10mA analogue signal output, suitable for electro-unit combination instrument DDZ-II or DDZ-III. It has the function of flow accumulating, digital communication. On-line correcting parameter, various power supply and so on. We can provide flange and magnetic fliter on customer's request. It's widely applied to petroleum industry, chemical plant, power atation, food processing, pharmaceutical factory and water processing.
|
0 (#0) |
62 |
2008.04.16 |
|
Measurement and Meter
|
KL-012 Portable pH Meter
Technical Specification:
Model KL-012
Range 0.00~14.00pH
Accuracy ?0.05PH
Resolution 0.01PH
Operating temperature 0℃~50℃
Automatic Temperature Compensation 0℃~50℃
Power Supply DC 9V
Dimensions 150mm?70mm?25mm
Weight 227g
|
0 (#0) |
53 |
2008.03.19 |
|
Measurement and Meter
|
Single Jet Liquid-Sealed Water Meter
LXS-13FD~32FD |
0 (#0) |
72 |
2008.03.10 |
|
Measurement and Meter
|
Big Size Multi Jet Liquid-Sealed Water Meter
LXS-80F~150F |
0 (#0) |
75 |
2008.03.10 |
|
Measurement and Meter
|
multi jet Liquid-Sealed water meter
LXS-15F~50F |
0 (#0) |
85 |
2008.03.10 |
|
Measurement and Meter
|
Volumetric Piston Water Meter
LXH-15A~20A/LXH-15B~20B |
0 (#0) |
77 |
2008.03.10 |
|
Measurement and Meter
|
Multi Jet Dry Type Water Meter
LXSC-15E~50E |
0 (#0) |
77 |
2008.03.10 |
|
Measurement and Meter
|
Single Jet Dry Type Water Meter
LXSC-13D-40D and LXSC-13D3-40D3 |
0 (#0) |
87 |
2008.03.10 |
|
 Prev 25 1 2 3 Next 25  | | Page 1 of total 3 pages | | x100 Index: 1 |
|
