| Directory |
Trade Leads |
Rated |
Visits |
Date |
Images |
Medical Equipment
 |
 Portable IPL beauty equipment (HM-IPL-B3)
HM-IPL-B3
Application
1. Remove unwanted hair;
2. Smooth fine wrinkles;
3. Shrink and tighten pores
4. Remove acne
5. Remove freckle, facial blemish;
6. Remove facial vascular lesions. (Telangiectasis)
7. Rejuvenate skin
IPL has certificates of Medical CE, ISO13485, and SFDA etc.
All IPL machines can be compatible in these aspects,
(1)Machine hand piece(treatment head)
(2)Sapphire filters
(3)LCD operating windows, it contains common LCD window and Colorful cartoon LCD window.
Our IPL machine filters or light Spectrum range can be rich to satisfy kinds of personalization requirements.
(1) Each hand-piece with only one specialized filter or crystal (1 Hand-Piece with 1 crystal for fixed treatment For example 520nm-1200nm or 620nm-1200nm )
(2) Each hand-piece with a set of several filter or crystal to be applied to a wide choice of treatment.
That is ,1 Hand-Piece with several crystals , For example ,1 crystal for Hair Removal, 1 Crystal for Skin Rejuvenation, 1 Crystal for Acne clearance , 1 Crystal for Depigmentation or pigmentation therapy etc.
OPTIONAL spot size: 8*40mm 15*50mm 15*35mm
Updated technology ,Optional IPL spot size ,colorful touch LCD with Multilanguage operating windows ,superior hand piece with protected connector avoiding water/electricity leakage .
Please contact Mr.Tony to know further about IPL &Laser machines.
NOTICE ,All portable IPL can have all kinds of hand pieces with different spot size 8x 40 mm, 15x50 mm and 15x35 mm.So users can plug either the handpiece with large spot 15x50 mm or a handpiece with small spot size 8x 40 mm in the same hand piece connector of the IPL machine .
The hand piece connector can avoid water/electricity leakage and let machine SIMM or preignition without failure
|
0 (#0) |
9 |
2008.07.30 |
 |
Medical Equipment
|
beauty tricks, care, beauty spa equipment etc.
nv-19 |
0 (#0) |
13 |
2008.07.28 |
|
Medical Equipment
|
tip hair, nail tips, beauty salon suppliers etc.
nv-8 |
0 (#0) |
25 |
2008.07.26 |
|
Medical Equipment
|
temperature probe
1.Compatible to YSI402 Series, COLIN, GE Marquette, MEK, BIONET, MED, Bionet, Choice Invivo
2. Adult size (Superficial)
3. Plug: Earphone Plug OD6.3
4. Cable material: PVC/Two inner wire/3.2m
5. Probe end: OD4.0
6. Precision: +0.1% within 32C-42C
|
0 (#0) |
22 |
2008.07.14 |
|
Medical Equipment
|
Suction electrode
Plug hole diameter: OD3.0mm
Ball diameter OD2.6mm
Material: rubber
Suck plate: OD 21mm
Package: 6/set
|
0 (#0) |
20 |
2008.07.14 |
|
Medical Equipment
|
NIBP cuff
RANGE 26-35CM
COVER MATERIAL: 210D WATER-PROOF
BLADDER: 100% TPU COMPRESSION RESISTANCE: 500mmg HYDRAGYRUM (TEST)
HOSE: OD3.8mm
|
0 (#0) |
21 |
2008.07.14 |
|
Medical Equipment
|
IBP cable
Connector: N10pin Datex
Cable:PVC OD5.3mm L; 4M
Sensor:Abbott, Medax
|
0 (#0) |
17 |
2008.07.14 |
|
Medical Equipment
|
ECG leadwires
Plug: AA style 5-lead;
AAMI standard: white, green, brown,red,black;
Well shield: TPUOD2.6mm shield cable, 0.9m;
Anti-static: semiconductor resist static and noises;
Special material conductor increase using life 3-5 times;
Electrode termination: snap style.
|
0 (#0) |
20 |
2008.07.14 |
|
Medical Equipment
|
X-ray Film Reader
*MD-300 model can be designed to enlarge the X-Ray film 50 times of images.
*It can be transmitted images into PC directly via USB cable and then the images will transfer to digital one immediately.
*It can read any standard dental X-Ray film and arrange the entire mouth teeth position chart with the software.
*Can make tube of teeth measuring, angle of teeth measuring, partly enlargement and fringe reinforcement all will be available.
*Can be adjusted image contrast, lightness and color.
*Images can be treated to be blurred, sharpened, reverse and false colorized.
*Each teeth position sequence number can be showed when pressing standard overview oral teeth position picture.
*Can make image of X-Ray film be transferred, saved and adjusted.
*It can transform correlative data into compact disc in order to be stored. |
0 (#0) |
35 |
2008.07.08 |
|
Medical Equipment
|
Wireless Intraoral Camera
Intraoral Camera? s Specification:
*Image sensor: 1/4 sony CCD
*Image resolution: 1.3 mega pixels
*Lamp: 6 pcs white LED(5600K)
*Accumulation point: 5mm~50mm
*Photographing visual angle: 70 degree
*Frequency: 5725~5875MHz
*Message output: USB 2.0
*Channel selection: 4 channel
*Receiving sensitivity: 95dB
*Compatible with Windows XP SP2/Windows Vista |
0 (#0) |
22 |
2008.07.08 |
 |
Medical Equipment
|
medical gas alarm system
Detailed Information
Medical gas alarm system can be used in nurse stations and information panels in operation rooms to monitor the pressure of medical gases.
The alarm signal is sent by electric pressure gauge or pressure switch.
It has self-test reset, which can detect whether the system is working properly.
A press on the reset button can stop the alarming sound.
There are three types of indicators to show three states respectively: under pressure, normal and over pressure.
Two types of medical gas alarm systems are available: three-gas module and seven-gas module. Electrical switches are designed to turn on or off the alarm of each gas.
An auxiliary machine is added to the cabinet so that the alarm signal can be transferred over a long distance.
It can be installed either onto or into the wall.
The aluminum alloy surface and the frosted painting technology give the cabinet an elegant look.
Technical Parameter
Power: 12VAC
Signal Input: RS485
|
0 (#0) |
25 |
2008.07.04 |
|
Medical Equipment
|
suction unit
Non-integraged suction unit.
Suction jar made of transparent poly carbon and being matte treated.
With safety valves which open in over-pressure conditions to reduce pressure.
Flowmeters are made by pure copper and are Chromium Plated.
Two types of humidifier covers for you to choose.
Pressure regulator is made of high quality alluminum alloy and is processed by CNC machine tools.
Suction jar capacity is 1.2L. When the jar is full, the suction process stops automatically.
Pressure regulator regulating scope: 0-200mmHg
Pressure regulator with electrical switch which can stop the suctioning process.
Suction jar is supported by stainless bracket, hang on bed head unit or be put on flat base.
Pin indexes of different standards are available in match with medical gas outlets of different standards.
With high silicon hoses
Integraged Suction Unit
The suction jar and the pressure regulator are integrated.
Suction jar has two types: 1L and 2L
When the jar is full, suctioning process stops automatically.
Pressure regulator regulating scope: 0-200mmHg
Pin indexes of different standards are available for you to choose.
May be installed onto bed head unit or be put on flat base.
Pressure regulator with switch which can stop suctioning
|
0 (#0) |
28 |
2008.07.04 |
|
Medical Equipment
|
flowmeter with humidifier
Flowmeter with regulator
Gas entrance pressure 15MPA, gas output pressure 0-2.5MPA (adjustable)
Flow rate: 0-10L/Min (adjustable)
Flowmeter is buoy type; two types of scales are available: 0-10L/min and 01-15L/min.
We have 3types of humidifiers, the bodies of which are all made of high quality and transparent poly carbon material.
Pressure reducer is made of pure copper.
Pressure reducer connector can be made according customer?s specific requirement.
Designed with a safety valve which opens in over-pressure conditions to reduce pressure.
Flowmeters we supply are made of pure copper and are Chromium Plated.
Two types of humidifiers are available for you to choose.
Wall type flowmeter with humidifier
Working pressure: 0-0.5Mpa (Not adjustable)
Flow rate: 0-10L/min
Buoy type flowmeter with two types of scale systems: 0-10L/min and 0-15L/min
Three types of humidifiers for you to choose. The body of the humidifier is made of high quality transparent poly carbon material.
Three types of probes: British standard, German(Din) standard, and American standard, or we can make probes according to your requirement.
With a safety valve which opens in over-pressure conditions to reduce pressure.
Flowmeter is made of pure copper and is Chromium Plated.
Two types of humidifier covers for you to choose.
|
0 (#0) |
30 |
2008.07.04 |
|
Medical Equipment
|
gas outlet & probe
The medical gas outlet are supplied by our own factory which is located in the suburb of Shanghai, covering an area of about 2000 square meters. We mainly supply medical gas outlet of American standard, British standard and German standard. We can also manufacture to your model or design, including products of French standard, Indian standard, Japanese standard and South African standard.
All the products are manufactured in strict accordance with international standards and can thus match perfectly with standardized pin index for gas outlets and the pin index for gas outlets we supply can also match perfectly with standardized medical gas outlets from other manufacturers.
The British standard medical gas outlets we supply can be used for oxygen, vacuum suction, compressed air, N20, N2, CO2 and AGSS. They can be connected with copper pipelines (usuallyΦ10) which is mostly installed in bedhead unit. They can also be connected with breather pipe through the connector installed in the pendant. We also supply medical gas outlet boxes in match with British standard medical gas outlets if you choose to install medical gas outlet onto the wall.
The German standard medical gas outlets can be used for oxygen, vacuum suction, compressed air and AGSS. They can also be connected with both copper pipeline and connector for breather pipe. Relative pin indexes are also available.
The American standard medical gas outlet can be used for oxygen, vacuum suction, compressed air, N2O, N2, and CO2. Presently we only supply the type that can be connected with copper pipelines. Pin indexes for gas outlets of different gases are available.
The medical gas outlets we supply have been certificated by ISO9001-2000 system and have been widely used in Middle East and south-east Asia.
Detailed Information:
|
0 (#0) |
43 |
2008.07.04 |
|
Medical Equipment
|
bed head unit / bedhead units
We are one of the leading manufacturers of medical bed head unit in China. We have 12 styles of bed head units for you to choose. Each style is a combination of different parts, which brings convenience for maintenance.
Detailed Information
Knock-down structure; Extruded by great tonnage hydraulic equipment;
The thickness of the surface panel is 2mm.
Designed in accordance with HTM2022 standard. Each bed head unit has four cavities for different pipelines.
The surface of the bed head unit can be painted into different colors according to your request, using static-electricity-painting technology. Different parts can be painted into different colors.
The bed head unit has enough inner space to install medical gas outlets, lamps, electrical switches and other equipment.
The lamp cover for the light cavity is made of special transparent plastic for medical use and customers can choose the length of it.
Gas outlets of different standards are available. We can also provide electrical switches and electrical sockets of British standard, French standard, Australian standard, etc..
Electric equipment can be installed on the surface of bed head unit or hidden under the surface of it.
The surface board can be pressed and clasped with the unit so that it can be easily disassembled when needed.
The bed head unit can either be fixed to the wall through screws or be hung on the wall.
Practical internal design and elegant in appearance.
The length can be customerized.
|
0 (#0) |
52 |
2008.07.04 |
|
Medical Equipment
|
Drugs of Abuse Rapid Diagnostic Test
Have four formats: strip, cassette,panel and cup. |
0 (#0) |
41 |
2008.06.19 |
|
Medical Equipment
|
Fecal Occult Blood (FOB) Rapid Diagnostic Test
Have two formats: strip and cassette. |
0 (#0) |
37 |
2008.06.19 |
|
Medical Equipment
|
HIV I&II Rapid Diagnostic Test
Have two formats: strip and cassette. |
0 (#0) |
53 |
2008.06.19 |
|
Medical Equipment
|
auto refractometer
Measuring Range:
-Spherical -20~+20D(VD=12) 0.12D/0.25Dsteps
-Cylinder -8~+8D 0.12D/0.25D steps
-Axis 0~180 1 steps
-Pupil Distance 45~85mm, 1mm steps
-Vertex Distance 0mm, 12mm, 13.75mm
-Min.Pupil Size 2.0mm
-Chart Auto fog
-Display 5"CRT Monitor
-Print Thermal Printer
-Power Supply 100~240V, 50/60Hz
-Dimensions 484(L)*282(W)*440(H)mm3
-Weight ~20kg(41 lb).
|
0 (#0) |
63 |
2008.06.10 |
|
Medical Equipment
 |
Main Page
Material: Approx. All Products are made of Stailless Steel. |
0 (#0) |
61 |
2008.06.04 |
|
Medical Equipment
|
Bandage Scissors
Material: Stainless Steel. |
0 (#0) |
72 |
2008.06.04 |
|
Medical Equipment
|
Forceps Extracting
Material: Stainless Steel. |
0 (#0) |
76 |
2008.06.04 |
|
Medical Equipment
|
Root Elevators
Material: Stainless Steel. |
0 (#0) |
71 |
2008.06.04 |
|
Medical Equipment
|
Syringes
Material Stainless Steel. |
0 (#0) |
62 |
2008.06.04 |
|
Medical Equipment
|
Scissors
Stainless Steel |
0 (#0) |
73 |
2008.06.04 |
|
Prev 25 1 