| Directory |
Trade Leads |
Rated |
Visits |
Date |
Images |
Building Plastic
 |
 composite geogrid
Composite Geogrid is geogrid and geotextile composite. The first composite form: Geogrid is self-adhesive glass fiber or polyester geogrid geogrid and geotextile is polyester filament geotextiles; second composite form: two-way plastic geogrid and geotextile composite.
Product characteristics:
Have high tensile strength, elongation is small, and vertical and horizontal deformation uniform characteristics. At the same time has high permeability, filter and excellent wear resistance
Main features:
Road subgrade strengthening, filter, drainage, protection, isolation
Engineering Applications:
1. for highways, railways, airports, and other road enhancements.
2. for the old road (asphalt pavement, cement concrete pavement) for the maintenance, such as widening.
3. for the subgrade strengthening.
Performance indicators :
120 G of geotextiles and 50 Kn glass fiber or polyester geogrid geogrid compound. Another: geogrid and geotextile specific models can be customized as required. Geogrid with a width of 1 m-6m.
|
0 (#0) |
23 |
2008.10.16 |
 |
Building Plastic
|
vinyl tile floor
this kinds of floor has strong advantage in waterproof, high wearable ability and so on |
0 (#0) |
132 |
2008.05.28 |
|
Building Plastic
|
sound absorbing foam
product:soundproof insulation(vinco-25)
composition: PVC rubber
Size:length3M*Width1000MM*thickness25MM
Density:5.5kg/m2
Effect:The separation volume Rw is 35dB
solid insulation
The products can prohibit the sound from block and shaking,and the noise from facilities and pipe and so on.
easy use in construction
It can be cut by simple tools such as utility knife.when you use glue,please suitable green glue is aviliable.
Areas for use
Architecture,living-room,factorybuilding,machinehouse,meeting-room,multi-hall,KTV,industrial pipe,office,mobile and so on.
|
0 (#0) |
156 |
2008.05.07 |
 |
Building Plastic
|
geogrid
4mx50m/roll
|
0 (#0) |
200 |
2008.04.21 |
|
Building Plastic
|
sell gypsum board
Our leading product is gypsum board, including standard board, fire-resistant board, moisture-resistant board .special size board and the board edge contains tapered edge and square edge.
PRODUCT?S SPECIFICATION
1.type
A: Standard board
B: Fire-resistant board
C: Water resistant board
2.Gypsum board edge:
A: tapered edge (recessed edge)
B: square edge (straight edge)
3.Color of the surface protective paper:
A: White ------usually for standard board
B: Red ------usually for fire-resistant board
C: Light green------usually for moisture resistant board
D: Light blue ------ usually for moisture resistant board
E: Other colors upon your detailed request.
4.Usage:
A: Ceiling system,
B: Partition system,
C: Dry lining system
5. function:
The property of our products is: fire resistant, moisture resistant, sound insulation, heat preservation, and do soon.
|
0 (#0) |
7209 |
2008.02.26 |
|
Building Plastic
|
polycarbonate sheet
Specifications of PC solid panel
Thickness: 2mm-12mm
Length: (coil) 30-50m
Width: 1220mm-2100mm
Color: pure, lake blue, green, brown, ivory
Specifications of PC hollow panel
Thickness: 4mm, 6mm, 8mm, 10mm
Length: standard is 6m, can also design according to the request from customers.
Width: standard: 2100mm, Max: 2160mm
Color: pure, lake blue, green, brown, ivory
|
0 (#0) |
252 |
2008.01.23 |
|
Building Plastic
|
pc sun sheet
Specifications of PC hollow panel
Thickness: 4mm, 6mm, 8mm, 10mm
Length: standard is 6m, can also design according to the request from customers.
Width: standard: 2100mm, Max: 2160mm
Color: pure, lake blue, green, brown, ivory
|
0 (#0) |
220 |
2008.01.16 |
|
Building Plastic
|
Polycarbonate Hollow/Solid Sheet
Specifications:
1) Thickness: 4mm,6mm,8mm,10mm,for special pls contact us
2) Width: 2,100mm,for special pls contact us
3) Length: 5,800mm/6,000mm/11,800mm
4) Weight (kg/sqm): 0.9, 1.3, 1.5, 1.7,
5) Colors: clear, lake blue, green, blue, opal, brown, silvery gray, red
|
0 (#0) |
319 |
2007.10.19 |
|
Building Plastic
|
Sell Polycarbonate hollow sheet, PC sun panel, insulation material
Specifications:
thickness: 4, 6, 8, 10, 12, 14, 16, 18, 20mm.
Width: 1.22,1.56,2.1m
Length: 5.8,11.8m
Twin or triple walls
Color: clear, blue, dark blue, green, dark brown, opal, etc
Colors & specifications are according to clients' requirements.
Packaging: Both surfaces are covered with PE film. Suitable for Long distance seaworthy transportation.
|
0 (#0) |
322 |
2007.10.17 |
|
Building Plastic
 |
Plastic Plywood / Formword / Concrete Shuttering Boards
Standard Thickness:
9mm, 10.5mm, 11.5mm, 15mm, 17.5mm, 21mm & 23mm.
Thickness varying from 6 to 30mm is available with varying dimensions up to a max. 2.5m long x 1.30m wide. Larger sizes has to be on special request.
|
0 (#0) |
536 |
2007.07.12 |
|
Building Plastic
|
Plastic Composite Planks / Boards / Decking
Standard Thickness:
9mm, 10.5mm, 11.5mm, 15mm, 17.5mm, 21mm & 23mm.
Thickness varying from 6 to 30mm is available with varying dimensions up to a max. 2.5m long x 1.30m wide. Larger sizes has to be on special request.
|
0 (#0) |
508 |
2007.07.12 |
|
Building Plastic
 |
Soben PVC Foam Board
It is a light weight extruded PVC foam board that is flame-retarded, water repellant, chemical resistant and contains no benzene or formaldehyde. It is suitable for a wide variety of wet applications, clean room wall lining, outdoor signage / billboards, in yachts or airplanes. |
0 (#0) |
514 |
2007.05.19 |
|
Building Plastic
|
polycarbonate (pc) sheet for sale
1.Hollow polycarbonate sheet :
Thickness : from 4mm to 16mm
( double wall: from 4mm-10mm;
triple wall: from 10mm-16mm)
width : standard size 1220mm, 1560mm,1820mm
and 2100mm (max.)
length : no limit
color : clear ,blue ,grass-green, lake-blue ,
opal , bronze
2.solid polycarbonate sheet:
Thickness :from 1.5mm to 10mm
width : standard size 1220mm,1560mm ,1820mm
and 2100mm (max.)
length : no limit
color : clear ,blue ,grass-green, lake-blue,
opal , bronze
3.embossed polycarbonate sheet:
Thickness : from 2.2mm to 5 mm
width : standard size 1220mm,1560mm ,1820mm
and 2100mm (max.)
length : no limit
color : clear ,blue ,grass-green, lake-blue,
opal , bronze
|
0 (#0) |
393 |
2007.05.07 |
|
Building Plastic
 |
foamed pvc floor border/foamed pvc celing profile
We offer a versatile of foamed pvc floor border and ceiling profiles If you are interested in our product range please contact us at email rosesu.aa@msa.hinet.net for more information.
|
0 (#0) |
521 |
2006.12.04 |
|
Building Plastic
|
Sell Polycarbonate Twin-Wall hollow Sheet
PC HOLLOW SHEET
specifications:
1) Width: 2,100mm
2) Length: 5,800mm / 6,000mm / 11,800mm
3) available in 4mm,6mm,8mm,10mm,16mm and other thicknesses
4) Color: clear, lake blue, green, blue, opal, bronze, silvery gray, red,
5) Customized colors and dimensions available upon requests
6) Packing: Both sides covered with PE film
|
0 (#0) |
659 |
2006.09.27 |
|
Building Plastic
|
air flow
The air curtain characteristic plays a very important role on the performance of vertical and stand refrigerated display case. The transient temperature of the display case shelves was measured for studying the temperature variation and distribution in the vertical display case by changing the number and the velocity of air curtain. The result shows that it is necessary to keep three air curtains in a vertical open low temperature display case and the performance of the display case can be improved by selecting reasonable air curtain velocities.
PC honeycomb has excellent compressive strength act as air curtain in refrigerated display cases.
Polycore Technology provide air curtain has excellent properties:
1. Core uniformality, inside smoothness, cleanness, surface level off.
2. PC raw material is safe for using as airfcurtain in showcase.
3. Lower shrink rate when temperature drop to -30 degree. This is very important for durable life of air curtain and provide installation safety for showcase manufacturer and supermarket operator.
|
0 (#0) |
576 |
2006.07.20 |
|
Building Plastic
|
plastic honeycomb
Polycore Technology is a leading manufacturer of honeycomb and lightweight composite solutions. Polycore Technology products include aluminum, paper and thermoplastic honeycomb, all of above products holding light weight with stiffness strength ratio and following characteristics:-- light weight with stiffness strength ratio
-- energy absorption-- corrosion, fungi, rot, chemical, moisture resistant-- Sound and vibration dampening-- RecyclableThermoplastic honeycomb has specials in
-- Electrical characteristics -- Magnetics characteristics- Flexible -- Easy assembly
Honeycomb cores are used in the fabrication of lightweight structures. The core material is typically 'sandwiched' between skins of plywood, aluminum, FRP composite material, steel, granite, solid surface materials, paper etc. To attach the 'skin' material to the honeycomb core, a bonding adhesive can be used or the materials can be laminated with polyester or epoxy systems. The resultant honeycomb panel results in one of the highest strength to weight core constructions available.
Polycore Technology has two kinds of plastic honeycomb:
One is PP honeycomb which can be supplied with both sides laminated with non-woven polyester tissue in either 40 g/m2 or 60g/m². This allows better bonding of the honeycomb to different panels. In addition to the tissue, honeycomb can be supplied with a PP film. The film under the tissue acts as a barrier to prevent resin leaking into the core and thus save resin consumption. This allows the honeycomb to be put into applications without using additional panels in special project.
PP honeycomb sheet can be laminated with foam on the both sides and made to customer requirement, so it can be widely used in sports activity provide safety protection for sportsman, such as elbow protector, kneepad, chest protector, helm, crash helmet,. Honeycomb core energy absorption property and high anti-pressing strength improve protection.
|
0 (#0) |
965 |
2006.07.20 |
|
Building Plastic
|
night blind
Polycore Technology night blind systems make a considerable contribution to reducing energy consumption in supermarkets.
The blind material is made of anti-freezing, tear-resistant knitted polyester fabric (PET) or PET with aluminized foil on both sides,The blind material absorbs the heat radiation from the sales area and keep cold air drop out of showcase, which prevents condensation from forming on the outside.Hand-operated blinds and Eletronic controll type blinds are available.
Advantages:
-- Energy savings of up to 30-35 %
-- No condensation
-- Tough and reliable construction
-- Minimum maintenance required
-- Easy installation
-- Simple to operate
-- Help preserve food quality and safety
-- No need for space storage
-- Help keeping product temperature constant
-- Can be retrofitted without problem
|
0 (#0) |
557 |
2006.07.20 |
|
Building Plastic
|
pvc pipe
Product Description
SPEC:
Dia.Thickness(mm) length(mm)
16 0.5 2900
16 0.8 2900
20 0.6 2900
20 1.0 2900
20 1.3 2900
20 1.4 2900
20 1.6 2900
20 1.8 2900
25 0.9 2900
25 1.2 2900
25 1.8 2900
32 1.0 2900
32 1.4 2900
32 1.2 2900
40 1.6 2900 |
0 (#0) |
598 |
2006.07.19 |
|
Building Plastic
|
pvc trunking
Product Description
Specifications(mmxmm) Thickness(mm) length(m)
15x10 0. 8 2-4
16x16 0. 8 2-4
24x14 0. 9 2-4
25x16 1. 0 2-4
39x19 1. 0 2-4
40x25 1. 1 2-4
50x25 1. 1 2-4
59x22 1. 3 2-4
50x50 1. 6 2-4
60x40 1. 3 2-4
75x50 1. 7 2-4
80x40 1. 5 2-4
80x50 1. 6 2-4
100x27 1. 5 2-4
100x40 1. 7 2-4
100x50 1. 9 2-4
100x60 1. 9 2-4
100x100 2. 3 2-4
150x50 2. 0 2-4
20x10 0. 7 2-4
24x14 0. 75 2-4
39x18 0. 9 2-4
59x22 1. 2 2-4
100x27 1. 35 2-4
20x10 0. 55 2-4
24x14 0. 6 2-4
15x30 0. 7 2-4
38x18 0. 8 2-4
59x22 1. 1 2-4
100x27 1. 3 2-4
We can do OEMand ODM, we can do every model you need. |
0 (#0) |
611 |
2006.07.19 |
|
Building Plastic
|
05foxselltoner & inkjet cartridge &ink refill& toner & cartr
E-Mail:fox@joycolor.com MSN: foxboy168@hotmail.com (pls join me)
Tel/ Fax:86-0573-5013697 website:hhtp://www.joycolor.com
Joycolor consumable manufacture Co.Ltd is a ink jet and laser toner cartridge manufacturer in China. The factory is |
0 (#0) |
2381 |
2005.02.26 |
|
Building Plastic
|
fiberglass reinforce plastic grating,ladder,handrail,guardrail,fence,frame
Pultrusion process is a mechanized process for FRP composites, involves pulling a collection of fibers in the form of roving, mat or fabric through a resin bath and then through a heated die to cure the resin, and then take shapes of profiles.
FRP pultr |
0 (#0) |
4059 |
2005.01.03 |
|
 Prev 25 1 Next 25  | | Page 1 of total 1 pages | | x100 Index: 1 |
|
