| Directory |
Trade Leads |
Rated |
Visits |
Date |
Images |
Plastic and Rubber Processing
 |
 PE Foam Sheet Extrusion Line
PE Foam Sheet extrusion Line, PE Foam Pipe Machine, PE Foam Rods Plant, PE Foam Net Machinery, PE Foam Sheets Laminating Machine, PE Foam Sheets Sealing Machine, PE Foam Sheets Bonding Machine, PE Foam Pipe Forming Machine, PE Air Bubble Sheet Equipment, XPS Foam Sheet Machine, XPS Foam Board Extrusion Line, PS Foam Sheet Extrusion Machine, HIPS Coating Machine, PS Film Laminating Machine, PS Foam Sheet Bonding Machines, Uni-Block Vacuum Forming Machine, PS Foam Recycling Plant, Foam Recycling Machine.
http://www.foamtech-korea.com |
0 (#0) |
47 |
2008.06.23 |
 |
Plastic and Rubber Processing
 |
5 Gallon PET bottle blowing machine
TOTAL POWER OF THE WHOLE SYSTEM IN KW. 22.5kw
TOTAL POWER CONSUMED BY PET BLOWING MACHINE IN KW. 3
POWER CONSUMED BY THE PREHEATER IN KW. 7.2kw/220v
TOTAL POWER CONSUMED BY THE TWO AIR COMPRESSORS
(HIGH PRESSURE AND LOW PRESSURE). 7.5kwx2
PRODUCTION CAPACITY
400BPH FOR 5L BOTTLE
90BPH FOR 5 GALLON BOTTLE
|
0 (#0) |
44 |
2008.06.11 |
|
Plastic and Rubber Processing
|
CM-A2 Automatic bottle blow molding machine
1. TYPE : Automatic Vertical Top Blow
2. MODEL : CM-A2
3. BLOW : Top
4. MATERIAL : PET PREFORM
5. WEIGHT OF MATERIAL : 9 gms to 60gms
6. BLOWING CAPACITY : 30cc to 2000cc
7. PRODUCTION RATE : 2000BPH for 500ml bottle
1800BPH for 750ml bottle
1500BPH for 1000ml bottle
1200BPH for 2000ml bottle
8. CONTROL : full computer control with Human/machine interface and automatic fault diagnosis/ alarm, electric eye counting, infared temperature contro. All parts are of international well-known brands.
9. MOULD ARRANGEMENT : Vertical Arrangement With Stationery and Shuttle Movement.
10. BLOWING HEADS : 2 Nos.
11. MOULDS : 2 Nos.
12. BLOWING TIME : 1.1-3.5 Sec
13. TOTAL CYCLE : 3-4.5Sec
14. SIZE OF THE MACHINE : H ? 1980, W ? 1280, L ? 1920
16. ELECTRICAL REQUIREMENTS : 380/220v,50-60Hz.
|
0 (#0) |
40 |
2008.06.11 |
|
Plastic and Rubber Processing
|
CM-A4 Automatic bottle blow molding machine
Productivity ( Depend on bottle design): 3200 to 4000pcs/h
Mould: 4cavity Bottle Body diamerter: 20mm to 100mm
Bottle height: 50mm to 350mm
Bottle neck diamete: 15mm to 32mm
Mould thick: 240mm
Mould: 500X500mm
Electrical source power: 380v 3Phase 220v 2Phase 50/60HZ
Power: 48kw Really use power: 14kw Operation air: 2000NL(8.0bar)/min B
low air: 2500NL(3.0bar) min Cooling water: 150L
min Size ( LxWxH): 1908x1858x1920mm
Weight: 3600kg
Auxiliary equipment : Preform unscrambler is equipped as standard |
0 (#0) |
44 |
2008.06.11 |
|
Plastic and Rubber Processing
|
PET bottle blow molding machine, semi-automatic
Bottle volume: 0.1L to 5L
Max. Production capacity: 500 to 750 bph ( 0.1L to 2L) 150 to 180 bph (2L to 5L)
Mould-clamping pressure: 10kg
Max. Size of mould: 300mm
Max. Mould opening stroke: 280mm
Max. Mouth diameter of bottle preform: 120mm
Max. Length of bottle preform: 250mm
Max. Heating speed of preform: 1800pcs/h |
0 (#0) |
49 |
2008.06.11 |
|
Plastic and Rubber Processing
|
filter
Single Filters Discs
Our production including the range of the common types of machines use in the field of the working of the plastics.
The continuous collaboration with the main constructors of system in the field allows us to answer ready to whichever requirements of diameter and kinds of filter.
　
Knitted Filters Discs
With the knitted filters can be realized filter packages for plastics extruder (for machines to plastics working) by more mesh electro-knit to 5, 10, 20 welding points.
　
Bordered Filters
The bordered filters are use for applications chemical-druggist and special fiber production. We realize bordered filters in aluminium to single or multiple mesh in several materials.
　
Special Filters
Our technical office is in a position to estimating the feasibility of elements leaking for whichever type of industrial application.
|
0 (#0) |
50 |
2008.04.14 |
|
Plastic and Rubber Processing
|
PPR/PP/PE Pipe Extrusion Line
Model
Items
RMSG-65
RMSG-90
Pipe Size(mm)
Ф16-63
Ф75-160
Screw Diameter(mm)
Ф65
Ф90
L/D
30:1
30:1
Screw Rotation Speed(rpm)
0-90
0-75
Capacity(kg/h)
120-160
180-220
Hauling Speed(m/min)
0-13
0-10
Cutting Means
Saw Blade or Non-scrap cutting
Pipe Length Control
Electron counting or electrical switch control
|
0 (#0) |
73 |
2008.04.11 |
|
Plastic and Rubber Processing
|
PVC/PP/PE Single Wall Corrugated Pipe Extrusion Line
Model
Item
RMSG-45/30(PP/PE)
RMSG65/25(PVC)
RMSG-65/30(PP/PE)
Screw Diameter(mm)
Ф45
Ф65
Ф65
L/D
30:1
30:1
30:1
Pipe Size(mm)
Ф10-20
Ф16-63
Ф16-63
Line Speed(m/min)
0-10
0-8
0-8
|
0 (#0) |
259 |
2008.03.28 |
|
Plastic and Rubber Processing
|
injection moulding,injection molding
PVC,PP,PC,TPE,etc. |
0 (#0) |
65 |
2008.03.03 |
|
Plastic and Rubber Processing
|
All Kinds of Licensing ,Tattoo Stickers, PVC Sticker A-2000
W: 65cm*D: 80cm*H: 183cm
110/220v 10cm 60
|
0 (#0) |
105 |
2007.11.20 |
 |
Plastic and Rubber Processing
|
Foam Block Molding Machine
PSB-Q200 Full-Automatic Block Molding Machine
Mold size: 2040x1020x530mm
Mold xol: 1.10cube
Products density/proportion: 6-30kg/cube
Capacity: 5-8piece /n
Steam inlrtDN: 0.6-0.8mps
Steam inlrtDN: 65mm
Compressed AirinietDN: 80mm
Supply power: 380v
Power: 7kw
Max contour size: 3600x2000x2750mm
Machine weight: 3t
PSB-Q300 Full-Automatic Block Molding Machine
Mold size: 3060×1250×630mm
Mold xol: 2.41cube
Products density/proportion: 6-30kg/cube
Capacity: 6-9piece /n
Steam inlrtDN: 0.6-0.8mps
Steam inlrtDN: 80mm
Compressed AirinietDN: 80mm
Supply power: 380v
Power: 7kw
Max contour size: 4500x2150x2950mm
Machine weight: 4.5t
PSB-Q600 Full-Automatic Block Molding Machine
Mold size: 6120×1250×630 mm
Mold xol: 4.82cube
Products density/proportion: 6-30kg/cube
Capacity: 6-9piece /n
Steam inlet DN: 0.6-0.8mps
Steam inlet DN: 150mm
Compressed Air inlet DN: 80mm
Supply power: 380v
Power: 13kw
Max contour size: 1500x2150x2950mm
Machine weight: 9.5t
PSB-Q800 Full-Automatic Block Molding Machine
Mold size: 8160×1250×630 mm
Mold xol: 6.43cube
Products density/proportion: 6-30kg/cube
Capacity: 6-9piece /n
Steam inlet DN: 0.6-0.8mps
Steam inlet DN: 150mm
Compressed Air inlet DN: 80mm
Supply power: 380v
Power: 13kw
Max contour size: 9500x2150x2950mm
Machine weight: 10.5t
PSB-QZ600 Full-Automatic Vacuum Foam Block Molding Machine
Mold size: 6120×1250×1040 mm
(6120×1250×630) mm
Mold xol: 7.96cube
Products density/proportion: 6-40kg/cube
Capacity: 7-11piece /n
Steam pressure: 0.6-0.8mps
Compressed Air inlet DN: 80mm
Steam inlet DN: 150mm
Connected loud: 35kw
Max contour size: 12600x3800x2900mm
Machine weight: 14500kg
Automatic feeding device optional
Electronic weighting and printing optional
PSB-QZ800 Full-Automatic Vacuum Foam Block Molding Machine
Mold size: 8160×1040×1040mm
(8160×1250×630) mm
Mold xol: 8.83cube
Products density/proportion: 6-40kg/cube
Capacity: 7-11piece /n
Steam pressure: 0.6-0.8mps
Compressed Air inlet DN: 80mm
Steam inlet DN: 150mm
Connected loud: 35kw
Max contour size: 1500x3900x2960mm
machine weight: 16500kg
Automatic feeding device: optional
Electronic weighting and printing: optional
|
0 (#0) |
94 |
2007.10.26 |
|
Plastic and Rubber Processing
|
Three Dimensional Panel Machine
construction panels, manufactured with a 3 dimensional wire structure in a combination of 2 cover mesh layers interconnected by truss wires, with expanded Polystyrene (EPS)-insulation core. It is a compact line, whose production process takes place in two main phases:
1.) Production of three-dimensional mesh panels from steel coils by means of a fully automatic mesh welder.
- Multiple welding machine with CNC-pitch feeding system to produce the flat mesh panels
- Multiple bending and welding machine to provide flat meshes with three dimensional rods
- Horizontal conveyor to transfer meshes toward assembling machine
2.) Assembling of structural panel by means of an automatic line. It consists of following main units:
- Assembling system to press three-dimensional frames into polystyrene core
- Multiple welder with CNC-pitch feeding system to weld together structural panels
- Automatic stacking device to eject and pile up finished panel outside the line
Electric current: 75kW
Max. intermittent welding power: 50 kVA
Welding current duty cycle: 5 %
Air compressor power: 3m 3/ min o.6Mpa
Width of panels: 1200 mm
Length of panels: min. 2500 mm, longer panels in steps of 00/40mm
Insulation core thickness: 100- 40 mm
Cover mesh: 50 x 50 mm openings
Wire diameter: -1.8- -3.8 mm as standard size proposed for
load bearing walls, slabs and roofs. Plain wire quality.
Also 2 longitudinal plaster runners as V-stamp of 20 mm.
Spacer wires: In truss configuration at 100 mm or 200 mm spacing.
Wire diameter 3.8 mm galvanized wire quality.
Insulation core: EPS, destiny approx. 15 –20 kg/m3
100 mm - 40 mm thickness.
Output speed :
Based on a 300 working days per year, each with 8 hours and assumed efficiency factor of 60 % (depending on local conditions), this results in a max. net output of pprox.300.000 m2 per year and per one working shift on a thus step of 200 mm and in a max. net output of approx. 220.000 m2 per year and per one working shift on a truss step of 100 mm. Hard drawn wire for cover mesh and for splice mesh:3 mm diameter, minimum yield strength of 500 to 550 N/mm2, maximum carbon contend 0.15 %, clean wire surface, no rust, reuse, oil, paint or drawing compounds to insure smooth flow of the welding current. Galvanized wire for spacer (truss) wires:3.8 mm diameter, minimum yield strenth of 700 N/mm2, maximum carbon content 0.15 %, clean wire surface and uniform zinc coating
|
0 (#0) |
92 |
2007.10.26 |
|
Plastic and Rubber Processing
|
Horizontal Color Steel and Sandwich Panel Compound Machine
The machine has reasonable structure and convenient operation. It has complete function of feeding, press-forming, glue dripping, heating, and edge mending, slotting and cutting.
It adopts precise low-speed gauge pump, frequency-changing speed adjustment, computer-control and accurate measurement.
It can combines flat and corrugated plates with various sizes. It can produce sandwich panels with width of 1000 -1200mm and thickness of 40-300mm as well as corrugated high tension compound board with width of 950 mm and thickness of 50 -100mm .
It is suitable of outer materials of color-steel, aluminum and stainless steel, etc, and inner materials of fire-retardant EPS Sand rock cotton, etc.
Technology Parameter
Size (mm):24000×2100×2600
Weight (kg):15700
Productiveness (m/min):1-4.2
Power (KW):25
|
0 (#0) |
102 |
2007.10.26 |
|
Plastic and Rubber Processing
|
Mesh Panel Welding Machine
AQP-01 Auto Control Fencing Mesh Welding Machine
This kind of auto welding machine is easy to handle, with following features:
1 Main unit: Welded with thick steel sheet and section steel, strong and concise.
2 Welding electronic control system: PLC digital system, one time pressing, separate welding. Precise control and stable function.
3 Wire laying devices: Auto weft wire feeding device. Easy to handle, high welding speed.
4 Wire mesh opening setting: PLC digital control.
5 Weft wire arranging: auto arranging.
6 Inner transformer: High efficient welding transformer. With 8 Grade adjustment.
Welding Wire Range: 3-6mm;
Welding opening: 50x50-500x500mm;
Welding machine applied: Wire mesh fence, fencing mesh and welded mesh panel.
AQP-2 Heavy Welded Mesh Panel Welding Machine:
This kind of welding machine is designed and produced with some state level patented technologies, and enjoys following features:
1 Main unit: Welded with thick steel sheet and section steel, strong and concise.
2 Welding Electronic Control System: Digital integration circuit control. Highly precise. Stable function.
3 Wire Laying Features: Weft wire feeding devices can be divided into auto feeding devices and hopper feeding devices.
4 Wire mesh moving: Flexible pull role and mesh fixing devices. Easyly adjustment of wire mesh. Precise mesh opening.
5 This kind of welding machine can reduce material loss to minimum.
6 Inner transformer: With 8 grade adjustment. Welding wire diameter: 1.8mm-3.2mm
Welding opening: 50x50mm to 150x150mm
Welding width: 1200-4000mm
This kind of welding machine is mainly applied to welding of wire mesh fencing and big welded wire mesh panels.
|
0 (#0) |
106 |
2007.10.26 |
|
Plastic and Rubber Processing
|
Tyre Retread Processing Line
Production scales:
Small Output: 12 sets recapped tyres per day, so the output for one year is 3120 sets recapped tyres.
Worker: 3~4 workers
Middle output factory: 26 sets recapped tyres per day, so the output for one year is 6760 sets recapped tyres.
Worker: 6~8 workers
Large output factory: 48 sets 26 sets recapped tyres per day, so the output for one year is 12, 480 sets recapped tyres.
Worker: 15 workers.
|
0 (#0) |
79 |
2007.10.23 |
|
Plastic and Rubber Processing
|
WPC Profiles and PVC Profiles Extrusion Line
180/240/300mm |
0 (#0) |
107 |
2007.09.30 |
|
Plastic and Rubber Processing
|
The macromolecule paint freee board extrusion line
1220X2400X1.2-2.3MM |
0 (#0) |
182 |
2007.09.30 |
|
Plastic and Rubber Processing
|
PP/PE/ABS/PMMA/PC/PS/HIPS plate and sheet extrusion line
Width of sheet 400-2000mm
Thickness of sheet 2-50mm
Production capacity 30-600kg/h
Production line speed 12m/min |
0 (#0) |
200 |
2007.09.30 |
|
Plastic and Rubber Processing
|
Large diameter Holllow Wall Winding Pipe Extrusion Line 200-3000mm
100-3000mm
Item Specification Extruder Total power/Load ratio 50% Max.output Outside dimensions
Model Model L/D ratio Main motor power Heating power
SKRG800 φ300-600 SJ90 30:1 75 30 230 260 10X21.5X2.6
SJ65 30:1 45 18
SKRG1200 φ400-1200 SJ90 34:1 110 30 300 500 10X23X2.7
SJ65 30:1 75 18
SKRG1500 φ900-1500 SJ90X30 30:1 110 30 450 600 28X18X6
SJ90X34 34:1 110 36
SJ90X30 30:1 75 18
SKRG2200 φ1200-2200 SJ120 30:1 75 60 500 700 30X20X7
SJ90 34:1 185 36
SJ65X30 30:1 110 18
SKRG3000 φ2200-3000 SJ150 30:1 260 80 650 800 32X20X8 |
0 (#0) |
153 |
2007.09.30 |
|
Plastic and Rubber Processing
|
PP/PET strap band extrusion line 8-20mm
8-20mm
|
0 (#0) |
188 |
2007.09.30 |
|
Plastic and Rubber Processing
|
PE/PVC double wall corrugated pipe extrusion line 50-1200mm
20-1200mm OD |
0 (#0) |
110 |
2007.09.30 |
|
Plastic and Rubber Processing
|
XPS foam board extrusion line 600-1200mm
Main specification is as below:
Output: 7000kg/day
Board width: 600-900mm
Board thickness: 20-80mm
Board density: 36-42kg/M3
Foam agent: HCFC F22
|
0 (#0) |
367 |
2007.09.30 |
|
Plastic and Rubber Processing
|
plastic extrusion production line
HC-series extrusion production lines are as follows: TSK series parallel twin screw extruder, Mono screw and dual screw extruder, extruding line for PE/PP pipe, Extruding line for UPVC/PPR/PE-Xa pipe, Aluminum-plastic complex pipe production line, PVC plate extrusion and PET baling strap production line |
0 (#0) |
311 |
2007.09.28 |
|
Plastic and Rubber Processing
|
plastic extruder
HC parallel Twin-screw Extruder is the extruding equipment with high-efficiency of mixing and smelting. Its core section is composed of “OO” type cylinder and two screws which mesh each other. The screw and cylinder are specially designed flexible to be easily adjusted, different screw and cylinder can be chosen according to different material characteristics. Good capacity of mixing, separating, dewatering and self-cleaning avoids the materials jam in extruding process. By rotation of the screws, the materials are well treated, dissolve at a high speed. |
0 (#0) |
343 |
2007.09.28 |
|
Plastic and Rubber Processing
|
plastic washing line
Details as follow:
PET bottle, flake recycling line
capacity: 300-1000kg/hr
PE,PP film recycling line
capacity:300-750kg/hr
|
0 (#0) |
117 |
2007.09.28 |
|
Prev 25 1 