| Directory |
Trade Leads |
Rated |
Visits |
Date |
Images |
Metal processing machine
 |
 centrifugal separator-henan kintae Inc
it is widely used in mineral mud of tungsten, tin, and iron.When the machine operates, it can cause great centrifugal force, and strengthen the election process, so as to make fine mineral particles have more effective recycle, it successfully resolve the recycle of small granule mineral. now it is widely used for recovery of tungsten, tin, iron ore and cement.
|
0 (#0) |
153 |
2008.01.18 |
 |
Metal processing machine
|
grinding balls, high chrome balls, grinding media
1.High Chrome Casting Balls
Chrome content:11-14%
Size: dia30-100mm
Hardness: dia30-70mm HRC58-63
dia80-100mm HRC57-62
2. Middle Chrome and Low Chrome casting balls:
Chrome content:1.5-10%
Size: dia30-100mm
|
0 (#0) |
84 |
2008.01.18 |
 |
Metal processing machine
|
crusher-mining machinery
PE-Jaw Crusher is used in metallurgy, mining, chemical, cement, construction, ceramics and refractories, in the industrial sector for various broken and Grinding of hard rock and ore used. 2, such series of crushers is fit for various minerals of which the compressive strength is 300MPa (MPa) at most. The largest size of crushed minerals should not exceed what is stated in the technical parameter table. |
0 (#0) |
143 |
2007.12.28 |
|
Metal processing machine
|
ball mill-mining machine
It is widely used in cement, silicate products, new building materials, refractories, fertilizers, ferrous and non-ferrous metal processing and the production of glass ceramics industry, also apply to the the dry or wet grinding in ores and other ground materials. |
0 (#0) |
170 |
2007.12.28 |
|
Metal processing machine
|
jaw crusher-mining machinery
Jaw Crusher is used in metallurgy, mining, chemical, cement, construction, ceramics and refractories, in the industrial sector for various broken and Grinding of hard rock and ore used. 2, such series of crushers is fit for various minerals of which the compressive strength is 300MPa (MPa) at most. The largest size of crushed minerals should not exceed what is stated in the technical parameter table.
|
0 (#0) |
122 |
2007.12.21 |
|
Metal processing machine
|
mining machine
mill uses horizontal sleeve revolving device, working with a gear wheel in the outside, two warehouses, grille-type ball mill. Material was spirally put in the first warehouse of mill through the hollow shaft by the input device, the warehouse has ladder-type and moire liner, and many different steel balls, they drop after they are lift by the centrifugal force. After materials were roughly ground in the first warehouse, will be ground in the second warehouse, and finish the expected effect.
|
0 (#0) |
127 |
2007.12.21 |
|
Metal processing machine
|
PEDK-6040S Laser cutting Machine for trademark cutting
This model is specially designed according to the production features of garment factories and embroidery factory. It featured in professional collocation and complete matched accessories. It is suitable for a wide range of material from the surface laser processing. Especially some materials difficult for ordinary laser ,such as white fabrics, cotton and flax expected, knitting materials, can be processed by this model. The innovative matched device, on the one hand steel is durable and maintenance costs is low; on the other hand, it can save a lot of time in admission materials and greatly improve the processing efficiency, meanwhile it avoids continuous work of some factories in the pursuit of laser processing efficiency. Therefore, prolong the laser life and lower the production cost.
Its supporting software is designed on the basis of the garment and embroidery Processing characteristics, such as embroidered cloth affixed within the resumption of foreign expansion. Cutting smooth curves, multi-format compatible documents, node editing, multi-tasking system.
|
0 (#0) |
115 |
2007.10.23 |
|
Metal processing machine
|
sell GW4240/50 double-column horizontal metal band saw machine
Max. Cutting capacity (mm): round ---- dia. 400; square ---- 400x500
Saw blade speed (m/min): 30/53/80
Saw blade size (mm): 34*1.1*4650
Motor output (k): 3.375
Workpiece clamping : hydraulic vice
Saw blade tensioning : Manual
Main drive: Worm wheel drive
Working feeding: Auxillary roller table
Size (LxH): 2110x1050x1620 mm
|
0 (#0) |
160 |
2007.08.29 |
|
Metal processing machine
|
sell GW4235 horizontal metal band saw machine
Max. Cutting capacity (mm): round ---- dia. 350; square ---- 350Wx350H
Saw blade speed (m/min): 30/53/80
Saw blade size (mm): 34*1.1*4250
Motor output (kw): 3.025 or 3.825
Workpiece clamping : hydraulic vice
Saw blade tensioning : Manual
Main drive: Worm wheel drive or Gear drive
Working feeding: Auxillary roller table
Size (LxH): 1580x1080x900 mm
|
0 (#0) |
129 |
2007.08.29 |
|
Metal processing machine
|
sell GW4235 horizontal metal band saw machine
Max. Cutting capacity (mm): round ---- dia. 350; square ---- 350Wx350H
Saw blade speed (m/min): 30/53/80
Saw blade size (mm): 34*1.1*4250
Motor output (kw): 3.025 or 3.825
Workpiece clamping : hydraulic vice
Saw blade tensioning : Manual
Main drive: Worm wheel drive or Gear drive
Working feeding: Auxillary roller table
Size (LxH): 1580x1080x900 mm
|
0 (#0) |
111 |
2007.08.29 |
|
Metal processing machine
|
sell GW4028 horizontal metal band saw machine
Max. Cutting capacity (mm): round ---- dia. 280; square ---- 300Wx220H
Saw blade speed (m/min): 20/45/90
Saw blade size (mm): 27*0.9*3350
Main motor output (k): 1.8 (4P)
Hydraulic motor (k): 0.37
Coolant pump (kw): 0.075
Workpiece clamping : hydraulic vice
Saw blade tensioning : Manual
Main drive: Worm wheel drive
Working feeding: Auxillary roller table
Weight: 750Kg
Size (LxH): 1600x1150x1200 mm
|
0 (#0) |
178 |
2007.08.29 |
|
Metal processing machine
|
LGI steel deck floor roll forming machine
The products are mainly used in steel structure industry for producing C&Z type purlin,colored wall and floor protecting steel plate, thermal insulating plate and load-bearing plate of buildings, and other complementary thin wall cold-bending shaped seel plates,expressway railings, colorful decorating and protecting steel plates for high-grade steel stucture residendces |
0 (#0) |
210 |
2007.08.21 |
|
Metal processing machine
|
nail making machine,high speed low noise nail making machine
Feature: Using plunger type structure to ensure the high working speed, low noise, and less chance of impact. It has the feature of advanced design, compact conformation, and good type. It is easy and safe to operate. |
0 (#0) |
148 |
2007.06.23 |
|
Metal processing machine
|
worldwide
The products are mainly used in steel structure industry for producing C&Z type purlin,colored wall and floor protecting steel plate, thermal insulating plate and load-bearing plate of buildings, and other complementary thin wall cold-bending shaped seel plates,expressway railings, colorful decorating and protecting steel plates for high-grade steel stucture residendces. |
0 (#0) |
145 |
2007.06.23 |
|
Metal processing machine
|
heat transfer machine
many kinds of size |
0 (#0) |
126 |
2007.06.18 |
|
Metal processing machine
|
Roof/ wall/ floor panel roll forming machine, Roof panel roll forming equipment, Roofing making mach
Roof panel roll forming machine, Roof panel roll forming equipment, Roofing making machine
It is an updated version of traditional roll forming machine. Instead of using screws at joining position, the corrugated sheets produced by this line are Self-locked and have successfully solved the problem of leakage The whole line consistof uncoiler.
The corrugated sheets produced by this line are strong and durable with high ribs.The joining type of these sheets is self-lock, which makes it easy to install and safe with excellent water proof and storm resistance. The products are widely used as the roof of factory, warehouse, garage, gymnasium, exhibition center, cinema.
1. Size: 19000mm×1700mm×1630mm
2. Total weight: about 12,000kg
3. Controlling system: PLC
4. Main motor power: 5.5kw
Hydraulic station power:2.2kw
5. Working speed: 10000~12000mm/min
6. Hydraulic pressure: 10~12Mpa
zw_bella#yahoo(dot)com
Roof panel roll forming machine, Roof panel roll forming equipment, Roofing making machine, construction line, building material machine, building material equipment, building material line, roll forming machine, roll forming equipment, roll forming line
|
0 (#0) |
104 |
2007.06.18 |
|
Metal processing machine
|
Corrugated roof forming machine, curved roof making equipment, Corrugated roof making line
Corrugated roof forming machine, curved roof making equipment, Corrugated roof making line,
roll forming machine produces self-locked corrugated roof panel. Lt mainly consists of uncoiler and its base, coil sheet guiding equipment, roll forming system, post-cutting equipment, hydraulic
station,controlling system, and panel supporter.
The large-span curving roof produced by HV-610 roll forming machine and HVW-610 curve-making machine is strongwith high pitches. The joining type of the roof is self-lock, which makes it easy to install and safe with excellent water proof and storm resistance. The curving roof can directly be produced on worksite, effectively lowering the cost. The product is widely used on large-scale and mid-scale industrial construction, such as factory, warehouse, garage, gymnasium, exhibition center, cinema, theatre and so on.
1. Size:15000mm×1300mm×1630mm
2. Total weight: about 12,500kg
3. Controlling system: PLC
4. Main motor power:11kw
Hydraulic station power:4kw
5. Working speed:10000~12000mm/min
6. Hydraulic pressure:18~20Mpa
zw_bella#yahoo(dot)com
Corrugated roof forming machine, curved roof making equipment, Corrugated roof making line, construction line, building material machine, building material equipment, building material line, roll forming machine, roll forming equipment, roll forming line
|
0 (#0) |
95 |
2007.06.18 |
|
Metal processing machine
|
EPS, PU Sandwich Panel Line, EPS, PU Sandwich Panel making machine, EPS Sandwich Panel equipment
EPS Sandwich Panel Line, EPS Sandwich Panel making machine, EPS Sandwich Panel equipment,
Iaminator for corrugated sandwich panel mainly consists of a roll forming machine and a sandwich
Panel laminating system. Through this line, corrugated sandwich panels can be produced directly, without the shortcoming that traditional corrugated sandwich panels have to be laminated manually after the forming of corrugated sheet. Moreover, both the roll forming machine and the laminating system can work independently. The roll forming machine of the line consists of feeding system, roll forming systm and cutting system, while the laminating system is made up of such equipment as decoiler, feeding, squeezing, heating,laminating, edge rolling,edge turn-over, groove-making, edge pruning, pneumatic device, automatic cutting and PLC. The whole machine possesses advanced working crafts.
The sandwich panels of this line are widely used as the roof and wall of factory, warehouse, garage, exhibition center，cinema， theatre， gymnasium， civil construction， stadium，cold storage， etc .
1.Size: 42000mm × 3600mm × 3300mm (Length × Width × Height)
2.Controlling system: PLC
3.Total power (including heating): about 40kw
4.Working speed: 1000~3000mm/min
5.Suitable working temperature: about 25
6.Density of EPS:>18kg/m
7.Suitable material for production:
1000~1200mm (0.5~0.6mm)
zw_bella#yahoo(dot)com
EPS Sandwich Panel Line, EPS Sandwich Panel making machine, EPS Sandwich Panel equipment,, construction line, building material machine, building material equipment, building material line, roll forming machine, roll forming equipment, roll forming line
|
0 (#0) |
148 |
2007.06.18 |
|
Metal processing machine
|
steel tile forming machine, glazed steel tile making machine, glazed colored steel tile forming equi
Colored steel tile forming machine, glazed steel tile making machine, glazed colored steel tile forming equipment,
It consists of decoiler and its base,coil sheet guiding equipment, roll forming system, pressing equipment, post-cutting equipment, hydraulicstation, and controlling system.
The colored steel tiles produced by this line look beautiful,elegant and noble. They are widely used as the roof of garden-like factory, hotel, exhibition center, villa, civil construction, etc.
1.Size:20000mm 1500mm 1400mm
2.Weight:11,500kg
3.Controlling system:PLC
4.Main motor power:4kw
Hydraulic station power:5.5kw
5.Nodal distance:
adjustable according to requirement(250mm)
6.Working speed: about 1500mm/min
zw_bella#yahoo(dot)com
Colored steel tile machine, glazed steel tile machine, steel tile forming equipment, construction line, building material machine, building material equipment, building material line, roll forming machine, roll forming equipment, roll forming line
|
0 (#0) |
101 |
2007.06.18 |
|
Metal processing machine
|
Z Purlin Forming Machine, Z Purlin Forming equipment, Z Purlin Forming line
Z Purlin Forming Machine, Z Purlin Forming equipment, Z Purlin Forming line,
It can produce many types of Z-shaped purline. The whole line mainly consists of uncoiler and its base,coil sheet flattening equipment, punching equipment, pre-cutting equipment, Z-shape forming system, hydraulic station, and controlling system.
The Z-shaped purlines formed by this machine have excellent anti-bending property and are easy to install. They are widely used as the supporter of roof and wall in large-scale and mid-scale construction, such as factory, warehouse, garage, exhibition center, cinema, theatre, garden and so on.
1. Size:23000mm× 2400mm× 1400mm
2. Total weight:about13,000kg
3. Controlling system:PLC
4. Main motor power:15kw
Hydraulic station power:15kw
Levelling motor power:2.2kw
5. Working speed:about13000mm/min
6. Hydraulic pressure:18~20Mpa
7. Product range: all the types from 100 to 240
zw_bella#yahoo(dot)com
steel structural machine, Z Purline Forming Machine, Z Purline Forming equipment, Z Purline line, construction line, building material machine, building material equipment, building material line, roll forming machine, roll forming equipment, roll forming line
|
0 (#0) |
84 |
2007.06.18 |
|
Metal processing machine
|
Laser Engraving/Marking Machine (PEDB-200)
Model: PEDB-200
Standard: ISO9000
Origin: Wuhan, China
Packing: airworthy or seaworthy packing
Min. Order: 1
|
0 (#0) |
87 |
2007.06.08 |
|
Metal processing machine
|
Laser Marking/Engraving Machine (PEDB-100)
HS Code: 84561000
Model: PEDB-100
Standard: ISO9000
Origin: Wuhan,China
Packing: airworthy or seaworthy packing
Min. Order: 1
|
0 (#0) |
74 |
2007.06.08 |
|
Metal processing machine
|
Engraving & Marking Machine (PEQD-001)
Model: PEQD-001
Standard: ISO9000
Packing: Airworthy Os Seaworthy Packing
Min. Order: 1
|
0 (#0) |
55 |
2007.06.08 |
|
Metal processing machine
|
Diode-Pumped Laser Marking/Engraving Machine (PEDB-300)
Model: PEDB-300
Standard: ISO9000
Origin: Wuhan, China
Packing: Airworthy Or Seaworthy Packing
Min. Order: 1
|
0 (#0) |
61 |
2007.06.08 |
|
Metal processing machine
|
Band Saw MachineGW4028
Max. Cutting capacity (mm): round ---- dia. 280; square ---- 300Wx220H
Saw blade speed (m/min): 20/45/90
Saw blade size (mm): 27*0.9*3350
Main motor output (k): 1.8 (4P)
Hydraulic motor (k): 0.37
Coolant pump (kw): 0.075
Workpiece clamping : hydraulic vice
Saw blade tensioning : Manual
Main drive: Worm wheel drive
Working feeding: Auxillary roller table
Weight: 750Kg
Size (LxH): 1600x1150x1200 mm
|
0 (#0) |
63 |
2007.06.01 |
|
|
Prev 25