| Directory |
Trade Leads |
Rated |
Visits |
Date |
Images |
Chemical Elements
 |
 Foam Filter Media
Diameter Density Porosity
0.8-1.2 mm 80 Kg/m3 50℅
|
0 (#0) |
3 |
2008.11.20 |
 |
Chemical Elements
|
Polymeric Aliuminum Ferric Chloride
Items indicators
PAFC
Liquid solid
The relative density（20℃）min 1.19
PH value（1 percent solution） 3.5-4.5 3.5-4.5
Alumina（AL2O3）content %min 10.0 29
Iron oxide content % 1-2 2-3
Alkalinity degree % 60-95 60-95
Water insoluble content %max 0.3 1.0
Arsenic (As) content %max 0.0003 0.0006
Manganese (Mn) content %max 0.045 0.01
Lead (Pb) content %max 0.001 0.003
Mercury (Hg) content %max 0.00002 0.00006
Sulfate (SO4) content % 3.5-9.6 3.5-10
|
0 (#0) |
4 |
2008.11.20 |
|
Chemical Elements
|
Maifanite Media
SiO2 AL2O3 Fe2O3 CaO FeO MgO K2O Na2O
54.89 9.52 3.6 8.75 5.05 10.29 1.55 0.97
|
0 (#0) |
3 |
2008.11.20 |
|
Chemical Elements
|
Walnut Shell Filter
Description Parameter
Capacity (each),m3/h 10425
Backwash strength,L/m2s 6.3
Design pressure, MPa 0.62.0
Design temperature, ?C 80
Filter velocity, m/h 2434
Backwash time, min. 2025
Filter resistance (single stage, in parallel), MPa max0.1
Filter resistance (each unit), MPa max0.12
Primary filtration (mg/L) Inlet SSmax100 Oil content max100
Outlet SSmax100 Oil content max10
Working cycle, h 825
Filter resistance (2 stages, in series), MPa 13%
Inlet water, mg/L SS max50 Oil max50
Outlet water, mg/L SS max10 Oil max10
|
0 (#0) |
3 |
2008.11.20 |
|
Chemical Elements
|
Activated Alumina
Item 3-5mmSphere 4-6mmSphere
Bulk density （g/ml） min0.70 min0.68
Surface area sq (m/g) 260-300 260-300
Pore volume (ml/g) 0.38-0.42 0.38-0.42
Static adsorption (RH=60%) 16-18 16-18
Crushing strength (N/P) min90 min120
Abrasion (%) max0.40 max0.40
|
0 (#0) |
3 |
2008.11.20 |
|
Chemical Elements
|
Fiber Balls Filter-Media
Analysis project Data Analysis project Data
Density 1.38kg/m3 filtration rate 20-85m/h
Obturation density 60-80kg/m3 load sewage amount 6-10kg/m3
Surface area 3000m2/m3 Sphere size 15-25、25-30mm
Porosity 96％ Sphere Appearance white granule elliptic
|
0 (#0) |
3 |
2008.11.20 |
|
Chemical Elements
|
Shale Ceramsite Filters
Analysis project Data Analysis project Data
Specific Gravity (g/cm3) 1.52 SiO2% 62-68
porosity (%) 55-78 Al2O3% 18-22
Bulk Density g/cm3 750-800 Fe2O3% 6-9
filtration rate m/h 10-40 (20-25) Surface area% 3980m2/m3
Interception capacity And using period higher than quartz sand 2.5 multiple Backwash intensity 15Lm2.S
|
0 (#0) |
3 |
2008.11.20 |
|
Chemical Elements
|
Scree Filtration
Analysis project Data Analysis project Data
SiO2 min98% Density 2.66g/cm3
Acid Solubility max0.2% Bulk density 1.85g/cm3
|
0 (#0) |
4 |
2008.11.20 |
|
Chemical Elements
|
Light Quality Ceramsite Filters
Analysis project Result Analysis project Result
Specific Gravity 1.4-2.2g/cm3 Compression Index 55-75%
Bulk Density 0.8-1.0g/cm3 Surface area 3980m2/m3
Backwash intensity
12-15L/S.m3 Compulsory filtration rate 20-40m/h
Interception capacity 2-3 times over quartz sand Normal filtration rate 20-25m/h
|
0 (#0) |
3 |
2008.11.20 |
|
Chemical Elements
|
Efficient Modified Fiber Ball
water quality before filter
Oil max20mg/L
Suspended matter max20mg/L
water quality after filter
Oil max2mg/L
Suspended matter max1.5mg/L
Size ratio to grade max1.5μm
COD removal rate min60%
|
0 (#0) |
4 |
2008.11.20 |
|
Chemical Elements
|
Magnetite Filtration
Specific Gravity(m3/T) Attrition Loss % Hardness broken rate Ferric(Fe)
4.5 max0.04 6 max0.05% 20-40
Sulphur(S) Fe2O3 Ash Content Bulk density Uniformity Coefficient
0.26% 70% max2.5% 2.95g/cm3 max1.8
|
0 (#0) |
3 |
2008.11.20 |
|
Chemical Elements
|
Anthracite Filters Material
Analysis project Data Analysis project Data
Carbon Content(C) min85% Hardness 3-3.75
Sulphur(S) 0.05% Ash Content max2%
Copper(Cu) 0.025% Specific Gravity 1.4-1.6
Lead(Pb) 0.045% Bulk Density 0.947T/m3
Zinc(Zn) 0.04% broken rate max0.58
Acid Solubility max2% Attrition Loss max0.53
Porosity 47-52%
Uniformity Coefficient K80 1.8-2.0
|
0 (#0) |
4 |
2008.11.20 |
|
Chemical Elements
|
Fruit Filters
Analysis project Unit Data Analysis project Unit Data
Specific Gravity g/cm3 1.25 Packing water % max10
Bulk density g/cm3 0.8 Puffiness rate % max3
Attrition Loss % max1.5 oil content % 0.25
oil removal rate % 90-95 Porosity % 48
removing rate of suspended matter % 95-98 Jetting pressure 0.32
filtration rate m/n 20-25 maintenance mode Supplement per year 5-10%
Backwash intensity m3/m2/n 25
|
0 (#0) |
4 |
2008.11.20 |
|
Chemical Elements
|
Manganese Sand Filtration
Analysis project MnO2 Density Bulk density Mn
Result 25-35 3.5g/cm3 2.4g/cm3 18-25%
Analysis project SiO2 Fe Mn C Ash Content
Result 16-20 8-19% 12-22% max3%
|
0 (#0) |
3 |
2008.11.20 |
|
Chemical Elements
|
Quartz Sand Filtration
Analysis project unit Result Analysis project unit Result
Ash Content % 0.05 Acid Solubility % 0.02
Density g/cm3 2.66 tolerance of acidity % 98
Attrition Loss % 0.03 Porosity % 43
broken rate % 0.35 Bulk Density g/cm3 1.75
SiO2 % 99.3 Hardness degree 7.5
|
0 (#0) |
3 |
2008.11.20 |
|
Chemical Elements
|
Activated Carbon for Electropate
Type
Spec GY-C2030 GY-C2031
Material Fruit Shell Wood
Moisture (%)max 15 15
Fe (%)max 0.1 0.1
Cl(%)max 0.05 0.1
Heavy Metals(%)max 0.01 0.01
Zn(%) None None
PH(min) 7 7
Iodine Number (mg/g)min 900 950
Surface Area (m2/g) 1000 1050
MB Value (mg/g) 105?10 105?10
|
0 (#0) |
4 |
2008.11.20 |
|
Chemical Elements
|
Activated Carbon with Silver
Parameter Product type
GY-C2022 GY-C2023
Moisture (%)min 10 10
Abrasion resistance % ()max 90 90
Iodine value (mg/g)max 1100 1000
Methylene blue adsorption rate (mg/g)max 180 155
PH 4.5-7.5 4.5-7.5
Ash content (%)min 5 5
Silver content (%) 0.15-0.25 0.06-0.15
Remaining chloride removal rate (%)max 90 90
Arsenic content (%)min 0.0003 0.0003
P lumbum content (%) min 0.001 0.001
Heavy metal content (%) min 0.004 0.004
Cyanide content No reaction No reaction
Particle size (mesh) 8~30,20~40 8~30,20~40
|
0 (#0) |
4 |
2008.11.20 |
|
Chemical Elements
|
Activated Carbon for Gold Recovery
Type
Spec GY-C2020 GY-C2021
Iodine(mg/g) min 1000 900
Methylene(mg/g) 180 150
Moisturer(%)max 5 5
Ash(%)max 5 5
Bulk density(g/l) 450-550 470-520
Iron
Salt(%)min
Hardness(%)min 97 93
PH 7-9 7-9
Above 6 mesh(%) 2 2
6-16 mesh(%) 90 90
Lower 16mesh(%) 5 5
|
0 (#0) |
4 |
2008.11.20 |
|
Chemical Elements
|
Coconut shell water processing Activated Carbon
Type
Spec GY-C2012 GY-C2013 GY-C2014 GY-C2015 GY-C2016 GY-C2017 GY-C2018 GY-C2019
Iodine(mg/g) min 1050 1000 1000 1000 1100 1150 1150 1000
Methylene(mg/g) 195 180 180 180 200 255 255 180
Moisture(%)max 5 5 5 5 8 5 8 8
Ash(%)max 4 4 4 4 4 4 4 4
Bulk density(g/l) 420-450 450-500 450-500 450-500 420-450 400-440 400-440 450-500
Iron salt(%)min 0.18
Hardness(%)min 95 97 97
PH 7-9 7-9 7-9 7-9 7-9 7-9 7-9 7-9
mesh
|
0 (#0) |
4 |
2008.11.20 |
|
Chemical Elements
|
Coconut Based Activated Carbon for Decolorization
Items Activated Carbon on Decolorization
GY-C2009 GY-C20010
Mesh Size（%）min
90 80
Hardness（%）min 90 90
Moisture（%）max 10 10
Iodine（mg/g）max 1000 900
Methylene Blue（mg/g）min 150 120
Dissolve（%）max 0.2 0.25
Solute in Acid（%）max 2.0 3.0
Iron（%）max 0.1 0.2
CA（%）max 0.05 0.1
CA,MG（%）max 0.25 0.25
PH 5-7 5-7
ASH（%）max 3.0 4.0
|
0 (#0) |
4 |
2008.11.20 |
|
Chemical Elements
|
Coconut Based Activated Carbon for Absorption and Chemisorption
Items Activated carbon from vinylon synthesis on carrier Activated carbon on carrier the extraction of precious metals
Activated carbon on recovery of organic solvent
GY-C2001 GY-C2002 GY-C2003 GY-C2004 GY-C2005 GY-C2006
Mesh Size(%)min 28-42 28-42 6-16 6-16 16-32 16-32
87 85 90 80 90 85
Bulk Ratio(g/ml) 0.385-0.42 0.385-0.44 0.4 0.4 0.35-0.5 0.35-0.5
Moisture(%)max 5 5 10 10 10 0
Hardness(%)min 73 70 90 90 73 70
Acetic Acid(mg/g)min 550 530
Zn Acetic Acid(g/100ml)min 7 6
PH 5.7 5-7 7 7
Minimun Fluidizing Velocity(cm/s) 10-12.5 9-12.5
Iodine(mg/g)min l000 900 1000 900
Water Dissolve (%) 80-130 80-130
Protection Time(minute)min 45 45
Protection Time(minute)min 27
|
0 (#0) |
4 |
2008.11.20 |
|
Chemical Elements
|
Activated Carbon for Food, Beverage and MSG
Type
Specifacation GY-W008 GY-W009 GY-W010 GY-W011 GY-W012 GY-W13
Methylene Blue(ml)min 10 11 12 13 14 15
Acid(%)min 80 85 90 90 98 98
Moisture(%)max 10 10 10 10 10 10
Iron Salt(%)max 0.1 0.1 0.05 0.05 0.05 0.05
ASH Content(%)max 8 7 6 6 5 7
Mesh Size(%)min 90 90 90 90 90 90
|
0 (#0) |
10 |
2008.11.19 |
|
Chemical Elements
|
Wood Based Activated Carbon for Purification and Refining
Items Standard
Methylene Blue(ml) min 12
Adsorption of Quinine Sulfate(mg/g)min 120
PH 7.0 - 9.5
Chloride Content(%)max 0.20
Iron Content(%)max 0.10
Acid-Solute Substance(%)max 6
Ash(%)max 7
Moisture (%)max 10
|
0 (#0) |
6 |
2008.11.19 |
|
Chemical Elements
|
Wood Based Activated carbon for Crease-Declorizing
Items Standard
PH 7.5 - 9.5
Chloride Content(%)max 0.20
Iron Content(%) max 0.30
Heavy Metal content(ppm) max 50
Acid-Solute Substance(%) max 3.5
Moisture(% )max 10
Uncarbonized Matters non
Decolorizing power to primitive colors of tea-seeds oil(% )min 80
|
0 (#0) |
6 |
2008.11.19 |
|
Chemical Elements
|
Wood Based Activated Carbon for Injection
Type
Specification GY-W005 GY-W006 GY-W007 Remarks
Ash (%) max 2.5 2.5 2.0 We also can produce the activated carbon according to the demand of the clients. We also can offer the free size without grinding.
Adsorption of Quinine Sulfate (mg/g) min 120 120 120
Methylene Blue (ml) min 12 12 12
Iran Content(%)max 0.02 0.02 0.02
Zinc Content(%)max 0.005 0.005 ----
PH 4.5 - 7.5 4.5 - 7.5 5.0 - 7.0
Chloride Content(%)max 0.10 0.05 0.05
Sulfate(%)max 0.05 0.05 0.05
Heavy Metal (ppm) max 30 30 30
AcidSolute Substance(%)max 0.8 0.8 0.8
Sulfide Content max non non non
Cyanide Content max non non non
Uncarbonized Matters max non non non
Moisture(%)max 10 10 10
|
0 (#0) |
6 |
2008.11.19 |
|
Prev 25 1 