|
|
|
|
|
|
|
|
|
Calendering, Filtering, Purifying machinery, Centrifuges
|
|
|
|
|
|
|
 |
| Directory |
Trade Leads |
Rated |
Visits |
Date |
Images |
Calendering, Filtering, Purifying machinery, Centrifuges
 |
 SINO-NSH OIL RECOVERY/OIL PURIFICATION PLANT
SINO-NSH VFD Transformer Oil (Filtration,Purification,Treatment,Recycling,Filter,Restoration,
Regeneration,Filtering,) Plant
Application
VFD insulating oil purification series is mainly used to improve the properties of insulation oil. It can remove trace water, gas, particulate matters etc. from the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, mutual inductors, cable and capacitors which has insulation system. VFD oil filtration series specialize in purifying branded oil, insulating oil of high voltage and super high voltage transformer. Additionally, it is suitable for treating low viscosity lubrication oil.
Insulation Oil Series
VFD Double-Stage High-Efficiency Vacuum Insulation Oil Purifier
VFD-A Double-Stage Vacuum Insulation Oil Automation Purifier
VFD-R Double-Stage Vacuum Insulation Oil Regeneration Purifier
VFD-T Double-Stage Vacuum Insulation Oil Purifier with Tester
GER Gas Engine Oil Regeneration System
Turbine Oil series
TF Turbine Oil Purifier
TF-A Turbine Oil Automation Purifier
TF-R Turbine Oil Regeneration Purifier
Lubrication Oil series
LV Lubrication Oil Purifier
LV-A Lubrication Oil Automation Purifier
LV-R Lubrication Oil Regeneration Purifier
EV-A Explosion-proof Vacuum Purifier
EP Explosion-proof Precision Filtering Purifier
EP-A Explosion-proof Precision Filtering Purifier
|
0 (#0) |
50 |
2006.03.09 |
 |
Calendering, Filtering, Purifying machinery, Centrifuges
|
Air Purifier
Prouduct( Shape) Size:370*180*500mm
Power(Rated Voltage): AC220V
Power Consumption:45W
Suitable Space(Capacity):25m2
Pre-Filter+ HEPA Filter+ Active Charcoal Filter+Low Temp. Catalyst Filter
LCD Panel
Circulates Air in All Directions.
Ionizer Assists in Air Cleaning
|
0 (#0) |
55 |
2006.10.05 |
|
Calendering, Filtering, Purifying machinery, Centrifuges
|
PLAIN DISCS
PLAIN DISCS Available in - Q P S
Diameter Arbour Thickness Reaom Max PLAIN DISCS ACCESSORIES
63 6,13 15 6300 9500 Product DIAMETER
75 6,13 15 5200 7900 Universal Spindle Assembly 8
100 6,13,16 15 3900 6000 Universal Spindle Assembly 13
115 6,13,16 15 3400 5200
152 6,13,16 15 3300 5000
150 13,16,22 15 2600 4000
180 13,16,22 15 2200 3500
200 13,16,22 15 2000 3000
|
0 (#0) |
49 |
2006.02.06 |
|
Calendering, Filtering, Purifying machinery, Centrifuges
|
CUP WHEEL
CUP WHEEL Available in - Q P S
Diameter Bore Use on machine Dia Max RPM Cupwheels are designed to safely copy with standard gnnder speeds.
90 16 ø100 11500 We recommend that you select and use a cup wheel one size smaller than the diameter ie,100mm Po;y-X cup wheel used on a 115mm grinder automatically reduces peripheral speed by 13%.
100 16,22.2 ø100 11500
115 22.2 ø125 11500
125 22.2 ø125 9500
150 22.2 ø180 8500
180 22.2 ø230 6500
|
0 (#0) |
43 |
2006.01.02 |
|
Calendering, Filtering, Purifying machinery, Centrifuges
|
HOOK & LOOP DISCS
HOOK & LOOP DISCS Available in - Q HOOK @LOOP ACCESSORIES
Diameter Use on Backing pad diam Max RPM Product Diameter
50 ø50 6000 Hook & Loop Backing Pad 50
63 ø50 5000 Hook & Loop Backing Pad 100
75 ø50 4400 Hook & Loop Backing Pad 125
100 ø100 3400
115 ø100 3400
125 ø100 3400
150 ø125 2600
180 ø125 1800
|
0 (#0) |
54 |
2006.02.15 |
|
Calendering, Filtering, Purifying machinery, Centrifuges
|
Filter Cartridge
Dear Sir or Madam,
First I would like to present our company to you. We are a trade company. And we are pleased to introduce ourselves as the one professional and leading manufacturer and trading agent in China, specializing in developing and producing Filter Cartridges for industry. Our main products are: Air filter, Oil filter, Presure Systerm Filter, Large Powder Filter, Air-blower Filter, Congregate Filter and Liquid Filter etc.
We take great advantages over the other Chinese manufacturers. Our products have the competitive quality and price. Products had been confirmed and accepted by worldwide customers.
If you are interested in our products, please let us know. Looking forward to hearing from you soon.
|
0 (#0) |
38 |
2006.03.08 |
|
Calendering, Filtering, Purifying machinery, Centrifuges
|
Filter
sell filter ,air filter ,filter media
|
0 (#0) |
44 |
2006.12.22 |
|
Calendering, Filtering, Purifying machinery, Centrifuges
|
Sell Foam Ceramic Filter CFS CFZ CFM CFA
Sell Foam Ceramic Filter CFS CFZ CFM CFA.
Technical Data:
Item Name CFS CFA CFM CFZ
Bore Density(PPi) 4~60 4~60 4~60 4~60
Porosity(%) 80~90 80~90 80~90 80~90
Refractoriness(C) 1670 1750 1750 1800
Bending Strength(Mpa) 0.8 0.6 0.6 0.8~1.0
Compression Strength(Mpa) 0.9 0.8 0.8 1.0~1.2
Thermal Shock Resistance 6 6 6 6
Square: A=40~500mm B=40~500mm H=10~50mm
Circle:=30~200mm H=5~20mm
Usual Specification of Production:
Circle(mm):
40X12 45X15 50X15 55X15 60X15 70X20 90X20 150X25 200X25
Square(mm):AXBXH
A=40~500mm B=40~500mm H=10~50mm
Please feel free to contact us for further information.
Lucy
Luoyang Refractory & Cheminmetals Co., Ltd
Address 1807 Youyiyuan, Anhui Road Luoyang,Henan, 471003 China
Tel: 86-379-6219-5363
Fax: 86-379-6518-5987
E-mail: lucyletterat163.com
|
0 (#0) |
51 |
2006.03.10 |
|
Calendering, Filtering, Purifying machinery, Centrifuges
|
Solid / Liquid Separation
SMICON is active in a wide variety of markets. Many customers use our machines for the processing of organic residue flows, for example in waste processing, biogas or the animal feeding industry. Furthermore, our customers can be found in the general industry, food industry, transport sector, agricultural sector, etc. We deliver our products to companies within the Netherlands and abroad.
The MAS was designed to separate solid parts from liquid products, waste and residue flows. An added advantage of the MAS is that - depending on the type of product to be processed -either residue flow is suitable for re-use or can be drained away or processed at reduced cost. We have a mobile installation at our disposal for on-site testing.
This machine has excellent qualities for dehydrating and separating any kind of solid or liquid process, waste or residue flow.
|
0 (#0) |
47 |
2006.10.28 |
|
Calendering, Filtering, Purifying machinery, Centrifuges
|
Sell The Separator And Centrifuge
Liaoyang Sunny Pharmaceutical Machinery Co. Ltd.is specialized in manufacturing separators. Our main products are tubular separators, cup type precipitate centrifuges, three-point settling centrifuges, three-point filterable centrifuges and other fluid mechanical equipment. The tubular separators are hTubular Separator Seriers
This machine can be used in food, chemical, biological product, blood, Chinese medicine, medicine intermediate product industry; and in separation of liquid solid and separation of liquid- liquid solid.
There are 2 main types of tubular separators.
Type GQ-for clarification can be mainly used in separation of suspended liquid difficult to be separated especially in separation of thin concentration fine particles, and in separation of suspended liquid of which the specific gravity difference between solid liquid phases in very small.
Type GF-for separation can be mainly used in separation of industrial emulsion difficult to be separated, especially suitable in separation of liquid-liquid with very small 2 phases small impurity.
According to different product of different users, the types of Chinese medicine clarification, bacteria body separation, blood separation, low temperature freeze, vacillation type, chemical, painting type, lab type and so on of the separators have been developed on the original general type base. They will further exert the separation effect and increase yield.
it products among all the products.
|
0 (#0) |
39 |
2006.03.08 |
|
Calendering, Filtering, Purifying machinery, Centrifuges
|
Sell Water Dispenser , Water Purifier
Shenzhen Hauangtat Industrial & Development Co.,Ltd.,principally engaged in the drinking water related products such as water dispenser, water purifier, cordless electric kettle , pure water plant equipment, auto bottling machine, mini fridge, wine cellar, and cooler & warmer boxes, etc for North American, European, Russian Japanese, Middle East and South-East Asia markets.we endeavor to provide not only high quality of the above products, but also OEM-made product range to cater for the changing needs of customers.
|
0 (#0) |
51 |
2006.12.25 |
|
Calendering, Filtering, Purifying machinery, Centrifuges
 |
Sell Auto Filter (Oil Filter, Air Filter, Fuel Filter) & Brake Pad, Disc
We, D&C International, are an official exporting agent for automotive oil filter, fuel fiter, air filter & brake parts like pad, disc in Korea.
We export the qualified products of the biggest Chinese manufacturers having the highest quality and competitive price and meeting all the OEM specifications. (certificated iso9001, qs9000, vda6.1)
We want to introduce our products and have business opportunity with your company. We promise our company will be the best business partner for you.
If you have any concern & questions, please inform us.
|
0 (#0) |
55 |
2006.08.22 |
|
Calendering, Filtering, Purifying machinery, Centrifuges
 |
Mineral Water Treatment Plant
Company Website www.eskayaqua.com
Eskay International, is Fast Growing company in water and waste water treatment field. We are Manufacturers and Exporter of Water Treatment Plants, Mineral Water Plant, R. O. Plant, Reverse Osmosis System ,
Sea Water Plant, Desalination Plant, Bottled Water Plant, Filtration System, Exporter, Softening Plant, Demineralization Plant. Eskay International has been established in 1988 at Rajkot.
World Latest Technologies of Process for Mineral Water ( Bottled Water ) Production from Different Source of water Like Bore Hole , Deep Well, River Water, Sea Water etc.
|
0 (#0) |
72 |
2006.10.29 |
|
Calendering, Filtering, Purifying machinery, Centrifuges
|
Fully Automatic Bottle Rinsing Filling Capping Machine
Please check our website www.eskayaqua.com for more details.
Fully automatic bottling machine specially designed and manufactured by Eskay for bottled water bottling, has provisions in the machine for rinsing, bottled water filling, capping and sealing automatically. The entire process
is fully computerized with PLC and Sensor control with one touch instrumentation system.
The whole equipment is sleek, and is capable of bottling various sizes of bottles ranging from 500 ml to 2 lts. Water bottles are fed into the input feed conveyor. The bottles are first picked up using an automatic robot arm which tilts the bottle on top of a rinsing spray which rinses the bottles in three stages.
Capacity 24 Bottles upto 200 Bottles per minute
Size : 500ml upto 5 Gallon Jars and Bottles.
|
0 (#0) |
54 |
2006.11.19 |
|
Calendering, Filtering, Purifying machinery, Centrifuges
|
Water Dispenser
Our Company, Hendrx Corp. a publictly traded company listed on OTCBB Nasdaq (SYMBOL: HDRX.OB),is engaged in the research and development, manufacture, marketing and worldwide distribution of water generation, filtration, ionization, and purification devices. Hendrx’s products include Atmospheric Water Generation (AWG units, Alkaline Calcium Ionic Water Dispensers, Reverse Osmosis (RO devices and RO under sink systems, as well as carbon filtration devices.
AWG units extract and purify drinking water from the air. Retrieving moisture from the air is practical, accessible, readily available and virtually unlimited in supply for creating safe, secure, potable water that meets or surpasses the highest international standards for water quality at a competitive price.
Hendrx manufactures two types of AWG units.. The first are residential/office units that, when placed in a room, will produce 5-12 gallons of water per day depending on humidity and temperature levels. AWG units are self-contained and need only a power source to produce clean drinking water throughout the day Residential/office AWG units can take the place of bottled water dispensers, eliminating the need for replenishment and storage of bottles. Residential/office units have been distributed under the ERIVA brand for the last three years.
|
0 (#0) |
76 |
2006.04.22 |
|
Calendering, Filtering, Purifying machinery, Centrifuges
|
Good Filters, Tanks, Softeners
FILTER TYPES
manufactured filter types in Technol:
- ADRIATIC
- MEDITTERAN
- ATLANTIC
Selection of dimension and position of the accesories
Heights and diameters change depending of customer exigences. Diameters are between 600 mm to 3500 mm. For the height is neccesary to consider that the minimun bed wash height is 1000 mm. The positions can be determineted by the customer.
Selection of accesories
Some accesories and their bigness are alternatives like sight glass, drainage, botton revision flange, air flange.
Selection of the Color
Painting by individual wishes by RAL.
ADRIATIC-N
This is the base filter type, it is manufactured until inside diameter 2400 mm.
- Filter with nozzle bottom, it's also possible a conventional lateral system.
- Sand bed height 1000mm or 1200mm
- It has a partial drainage
- It has a ring support
MEDITERRAN
This model is manufactured until inside diameter 2400 mm
- It has nozzle bottom
- Sand bed height 1000mm or 1200mm
- Internal relation between the height of the funnel over the sand and the fress space at the tpo according to DIN norms
- Standdard equipment of sight glass DN 200 according to DIN norms
- Backwashing is possible also with the help of air
- It has a partial drainage
- It has a ring support
ATLANTIC
This is the most completley filter type, it's manufactured until inside diameter 3500 mm
- it can be manufactured with chemical resistance liner PVC, PP or PE calculated on the basic of walls thickness AD-Merkblatt 2000 N1
- The drainage is total
- Standdard equipment of sight glass DN 200 according to DIN norms
- Back wash with air
- Botton revision flange is possible
- It is possible to manufacture filters for working pressure 4 bar and 6 bar
- The filters are manufactured according to DIN 19605 and DIN19643 standard
COMPARISON OF FILTER TYPES
ADRIATIC MEDITERAN ATLANTIC
Diameter maksimum 2400 2400 3500
Working pressure 2,5 2,5 until 6
Liner Vinylester or bisphenol Vinylester or bisphenol Vinylester, bisphenol, PVC, PP, PE
Support ring ring
Drainage partial partial total
Bottom flange revision no no yes
|
0 (#0) |
55 |
2006.05.02 |
|
Calendering, Filtering, Purifying machinery, Centrifuges
|
Sell Filters
With different dimensions and heights.
Glass Fiber material
High quality nozzle bottom
Resist to any corrosion
All the flange connection GRP
Lifting Lug
BackWash is possible
|
0 (#0) |
47 |
2006.02.20 |
|
Calendering, Filtering, Purifying machinery, Centrifuges
|
Sell Filters, Tanks, And Softeners
ADRIATIC-N
This is the base filter type, it is manufactured until inside diameter 2400 mm.
- Filter with nozzle bottom, it's also possible a conventional lateral system.
- Sand bed height 1000mm or 1200mm
- It has a partial drainage
- It has a ring support
MEDITERRAN
This model is manufactured until inside diameter 2400 mm
- It has nozzle bottom
- Sand bed height 1000mm or 1200mm
- Internal relation between the height of the funnel over the sand and the fress space at the tpo according to DIN norms
- Standdard equipment of sight glass DN 200 according to DIN norms
- Backwashing is possible also with the help of air
- It has a partial drainage
- It has a ring support
ATLANTIC
This is the most completley filter type, it's manufactured until inside diameter 3500 mm
- it can be manufactured with chemical resistance liner PVC, PP or PE calculated on the basic of walls thickness AD-Merkblatt 2000 N1
- The drainage is total
- Standdard equipment of sight glass DN 200 according to DIN norms
- Back wash with air
- Botton revision flange is possible
- It is possible to manufacture filters for working pressure 4 bar and 6 bar
- The filters are manufactured according to DIN 19605 and DIN19643 standard
|
0 (#0) |
41 |
2006.02.04 |
|
Calendering, Filtering, Purifying machinery, Centrifuges
|
Good Filters, Tanks And Softeners
ADRIATIC-N
This is the base filter type, it is manufactured until inside diameter 2400 mm.
- Filter with nozzle bottom, it's also possible a conventional lateral system.
- Sand bed height 1000mm or 1200mm
- It has a partial drainage
- It has a ring support
MEDITERRAN
This model is manufactured until inside diameter 2400 mm
- It has nozzle bottom
- Sand bed height 1000mm or 1200mm
- Internal relation between the height of the funnel over the sand and the fress space at the tpo according to DIN norms
- Standdard equipment of sight glass DN 200 according to DIN norms
- Backwashing is possible also with the help of air
- It has a partial drainage
- It has a ring support
ATLANTIC
This is the most completley filter type, it's manufactured until inside diameter 3500 mm
- it can be manufactured with chemical resistance liner PVC, PP or PE calculated on the basic of walls thickness AD-Merkblatt 2000 N1
- The drainage is total
- Standdard equipment of sight glass DN 200 according to DIN norms
- Back wash with air
- Botton revision flange is possible
- It is possible to manufacture filters for working pressure 4 bar and 6 bar
- The filters are manufactured according to DIN 19605 and DIN19643 standard
|
0 (#0) |
54 |
2006.02.17 |
|
Calendering, Filtering, Purifying machinery, Centrifuges
|
Good Filters
ADRIATIC-N
This is the base filter type, it is manufactured until inside diameter 2400 mm.
- Filter with nozzle bottom, it's also possible a conventional lateral system.
- Sand bed height 1000mm or 1200mm
- It has a partial drainage
- It has a ring support
MEDITERRAN
This model is manufactured until inside diameter 2400 mm
- It has nozzle bottom
- Sand bed height 1000mm or 1200mm
- Internal relation between the height of the funnel over the sand and the fress space at the tpo according to DIN norms
- Standdard equipment of sight glass DN 200 according to DIN norms
- Backwashing is possible also with the help of air
- It has a partial drainage
- It has a ring support
ATLANTIC
This is the most completley filter type, it's manufactured until inside diameter 3500 mm
- it can be manufactured with chemical resistance liner PVC, PP or PE calculated on the basic of walls thickness AD-Merkblatt 2000 N1
- The drainage is total
- Standdard equipment of sight glass DN 200 according to DIN norms
- Back wash with air
- Botton revision flange is possible
- It is possible to manufacture filters for working pressure 4 bar and 6 bar
- The filters are manufactured according to DIN 19605 and DIN19643 standard
|
0 (#0) |
50 |
2006.10.26 |
|
Calendering, Filtering, Purifying machinery, Centrifuges
|
High Quality Filters, Softeners
ADRIATIC-N
This is the base filter type, it is manufactured until inside diameter 2400 mm.
- Filter with nozzle bottom, it's also possible a conventional lateral system.
- Sand bed height 1000mm or 1200mm
- It has a partial drainage
- It has a ring support
MEDITERRAN
This model is manufactured until inside diameter 2400 mm
- It has nozzle bottom
- Sand bed height 1000mm or 1200mm
- Internal relation between the height of the funnel over the sand and the fress space at the tpo according to DIN norms
- Standdard equipment of sight glass DN 200 according to DIN norms
- Backwashing is possible also with the help of air
- It has a partial drainage
- It has a ring support
ATLANTIC
This is the most completley filter type, it's manufactured until inside diameter 3500 mm
- it can be manufactured with chemical resistance liner PVC, PP or PE calculated on the basic of walls thickness AD-Merkblatt 2000 N1
- The drainage is total
- Standdard equipment of sight glass DN 200 according to DIN norms
- Back wash with air
- Botton revision flange is possible
- It is possible to manufacture filters for working pressure 4 bar and 6 bar
- The filters are manufactured according to DIN 19605 and DIN19643 standard
|
0 (#0) |
44 |
2006.07.16 |
|
Calendering, Filtering, Purifying machinery, Centrifuges
|
High Quality Filters, Tanks, Softeners And So On
ADRIATIC-N
This is the base filter type, it is manufactured until inside diameter 2400 mm.
- Filter with nozzle bottom, it's also possible a conventional lateral system.
- Sand bed height 1000mm or 1200mm
- It has a partial drainage
- It has a ring support
MEDITERRAN
This model is manufactured until inside diameter 2400 mm
- It has nozzle bottom
- Sand bed height 1000mm or 1200mm
- Internal relation between the height of the funnel over the sand and the fress space at the tpo according to DIN norms
- Standdard equipment of sight glass DN 200 according to DIN norms
- Backwashing is possible also with the help of air
- It has a partial drainage
- It has a ring support
ATLANTIC
This is the most completley filter type, it's manufactured until inside diameter 3500 mm
- it can be manufactured with chemical resistance liner PVC, PP or PE calculated on the basic of walls thickness AD-Merkblatt 2000 N1
- The drainage is total
- Standdard equipment of sight glass DN 200 according to DIN norms
- Back wash with air
- Botton revision flange is possible
- It is possible to manufacture filters for working pressure 4 bar and 6 bar
- The filters are manufactured according to DIN 19605 and DIN19643 standard
|
0 (#0) |
35 |
2006.01.19 |
|
Calendering, Filtering, Purifying machinery, Centrifuges
|
High Quality Filters
ADRIATIC-N
This is the base filter type, it is manufactured until inside diameter 2400 mm.
- Filter with nozzle bottom, it's also possible a conventional lateral system.
- Sand bed height 1000mm or 1200mm
- It has a partial drainage
- It has a ring support
MEDITERRAN
This model is manufactured until inside diameter 2400 mm
- It has nozzle bottom
- Sand bed height 1000mm or 1200mm
- Internal relation between the height of the funnel over the sand and the fress space at the tpo according to DIN norms
- Standdard equipment of sight glass DN 200 according to DIN norms
- Backwashing is possible also with the help of air
- It has a partial drainage
- It has a ring support
ATLANTIC
This is the most completley filter type, it's manufactured until inside diameter 3500 mm
- it can be manufactured with chemical resistance liner PVC, PP or PE calculated on the basic of walls thickness AD-Merkblatt 2000 N1
- The drainage is total
- Standdard equipment of sight glass DN 200 according to DIN norms
- Back wash with air
- Botton revision flange is possible
- It is possible to manufacture filters for working pressure 4 bar and 6 bar
- The filters are manufactured according to DIN 19605 and DIN19643 standard
|
0 (#0) |
41 |
2006.12.10 |
|
Calendering, Filtering, Purifying machinery, Centrifuges
|
Selling Agents For Filters
we are a company in Europe, and now we have sales departments in China, we want to develop markets in other cities, so we are now looking for agents of our products.
if you are interested, please contact us.
Zhang Bin
Sinoslo Technology(SIP)Co.,Ltd
Add: No.5 Dongxing Road
Suzhou Industrial Park
Suzhou, P.R.China 215021
Tel: +86-512-67506426
+86-512-62279717
13306136929
Fax: +86-512-67261059
my msn is zbsuda at hotmail dot com
my skype is zbsuda
my mail is zbsuda at hotmail dot com
|
0 (#0) |
50 |
2006.02.16 |
|
Calendering, Filtering, Purifying machinery, Centrifuges
|
Selling Agents For Filters In Other Cities
we are a company in Europe, and now we have sales departments in China, we want to develop markets in other cities, so we are now looking for agents of our products.
if you are interested, please contact us.
Zhang Bin
Sinoslo Technology(SIP)Co.,Ltd
Add: No.5 Dongxing Road
Suzhou Industrial Park
Suzhou, P.R.China 215021
Tel: +86-512-67506426
+86-512-62279717
13306136929
Fax: +86-512-67261059
my msn is zbsuda at hotmail dot com
my skype is zbsuda
my mail is zbsuda at hotmail dot com
|
0 (#0) |
49 |
2006.12.12 |
|
|
|
Terms of Use - Link Exchange - Our Partners - Trade Organisations -
Industry Associations - FAQ - About Us - Advertise - Help
Copyright Notice © 1998-2007 Berlinkauf.com Corporation and its licensors. All rights reserved.
| |
Prev 25